The Keysight E2730A is a VXI RF tuner module that tunes from 20 MHz to 2700 MHz with 1 kHz resolution, delivering a 70 MHz intermediate frequency with 36 MHz bandwidth. Designed for surveillance and monitoring, this single-slot C-size VXI module combines low phase noise synthesis with high dynamic range and achieves a third-order input intercept point of +5 dBm. The tuner operates via VXI interface or front-panel RS-232 control using IEEE-488.2 command protocols.
Technical Specifications
• Frequency Range: 20 MHz to 2700 MHz
• Tuning Resolution: 1 kHz steps
• Form Factor: Single-slot, C-size VXI module
• IF Output: 70 MHz center frequency, 36 MHz bandwidth
• Manual Gain Control: Up to 56 dB
• RF Input Attenuation: 0 to 30 dB in 2 dB steps
• Third-Order Intercept Point (IP3): +5 dBm
• Noise Figure: 11 dB (20–1200 MHz), 12 dB (1200–2700 MHz)
• Phase Noise: Low phase noise frequency synthesizers
• Operating Temperature: 0 to 50 °C
– Key Features
• Microprocessor-controlled, synthesized tuner architecture
• LO sample outputs (1st and 2nd LO) enable two-channel phase-coherent tuning
• High dynamic range with +5 dBm IP3
• Status monitoring and hardware failure detection including Local Oscillator loop lock
• Front-panel ERR and RUN LED indicators
• Milled aluminum chassis construction with surface-mount technology
• Plug-in YIG assembly with seven internal modules
– Control & Communication
• VXI standard word serial protocol
• IEEE-488.2 command format
• Remote operation via VXI backplane or RS-232 front-panel port
– Compatibility & Integration
The E2730A integrates into the Agilent E3238S Signals Development System and the 89600 VXI-based Vector Signal Analyzer (VSA) series, supporting high-density VXI system configurations.
