The Keysight U2056XA is a USB-connected average power sensor for RF power measurement from 10 MHz to 54 GHz. It delivers real-time readings at up to 50,000 measurements per second with zero dead time, ensuring no pulse data loss during transient signal analysis. The sensor spans -70 dBm to +20 dBm across 10 MHz to 50 GHz, and -70 dBm to +15 dBm above 50 GHz to 54 GHz, accommodating both low-level and high-level signals without compromise. Internal zeroing and automatic calibration streamline setup and reduce measurement uncertainty. Time-selective average power functionality provides full dynamic range across varying signal conditions, making the U2056XA suitable for wireless communications, radar systems, and satellite equipment testing. The 1.85 mm male connector accepts standard RF cables. Keysight BenchVue software integration enables instrument control and data logging without custom programming, while built-in presets cover common radar and wireless standards: DME, GSM, EDGE, WCDMA, WLAN, and LTE.
Technical Specifications
• Frequency Range: 10 MHz to 54 GHz
• Power Range: -70 dBm to +20 dBm (10 MHz to 50 GHz); -70 dBm to +15 dBm (>50 GHz to 54 GHz)
• Measurement Speed: Up to 50,000 readings per second
• Measurement Type: Average power with time-selectivity
• Dead Time: Zero
• Connector: 1.85 mm male
• Triggering: Built-in trigger input and output
– Key Features
• Internal zero and automatic calibration functions
• Zero dead time measurement for continuous pulse capture
• Time-selective average power for full dynamic range operation
• Built-in presets for DME, GSM, EDGE, WCDMA, WLAN, and LTE
• USB powered and controlled
– Typical Applications
• Wireless communications testing
• Radar system validation
• Satellite equipment characterization
• Pulsed signal analysis
– Compatibility & Integration
The U2056XA operates with Keysight BenchVue software (BV0007B Basic Power Meter/Sensor Control and Analysis App included) and is compatible with U/L2050/60 X-Series firmware A.02.02 and above. Standard accessories include a 5 ft USB cable, two 50 Ω BNC-to-SMB trigger cables (1.5 m), and calibration certificate. Extended cable lengths are available as optional items.
