The Amplifier Research 150A220 is a solid-state, linear broadband RF amplifier engineered for laboratory and test environments demanding instantaneous bandwidth across a wide frequency span. Built on MOSFET technology, this 150 W rated amplifier delivers up to 250 W typical output at 3 dB compression while maintaining ±1.5 dB flatness across its operating range. The unit provides 53 dB minimum gain with continuous 18 dB adjustment capability, allowing precise power control from 1.0 mW input. Complete thermal and over-current protection, combined with 100% mismatch tolerance at rated output power, ensures operation survives any source and load impedance combination without damage, foldback, shutdown, or oscillation. With harmonic distortion of −20 dBc (10 kHz to 125 MHz) and −30 dBc (125 MHz to 250 MHz), the amplifier meets demanding spectral purity requirements. RF rise time of 3 ns maximum and a typical third-order intercept point of 60 dBm support high-fidelity signal conditioning. The 150A220 accepts 50 Ω sources with 1.5:1 maximum VSWR and configures in multiple form factors, including rack-mount (M1) and BNC-input (M6) variants. Remote control via 25-pin subminiature D connector and optional computer interface (CP2001, CP3000 accessories) enable automated test sequences and system integration.
Technical Specifications
• Frequency Range: 10 kHz to 220 MHz instantaneously
• Rated Output Power: 150 watts
• Input for Rated Output: 1.0 mW maximum
• Power Output @ 3 dB Compression: 250 W typical, 150 W minimum
• Power Output @ 1 dB Compression: 200 W typical, 150 W minimum
• Gain (maximum setting): 53 dB minimum
• Gain Adjust (continuous range): 18 dB minimum
• Flatness: ±1.5 dB maximum
• Harmonic Distortion at 150 W: −20 dBc (10 kHz–125 MHz); −30 dBc (125 MHz–250 MHz)
• Third-Order Intercept Point: 60 dBm typical
• RF Rise Time (10% to 90%): 3 ns maximum
• Input Impedance: 50 Ω, 1.5:1 VSWR maximum
• Mismatch Tolerance: 100% of rated power without damage across all source/load impedance magnitudes and phases
– Key Features
• Solid-state MOSFET design for linear amplification
• Integrated thermal and over-current protection
• Total mismatch tolerance at rated output power
• Broadband operation without tuning
• Continuous gain adjustment for precise output control
– Interfaces & Configuration
• RF Input: Type N female (Type BNC female on M6 variant)
• RF Output: Type N female
• Remote Control: 25-pin subminiature D connector
• Computer Interface: CP2001 and CP3000 accessories available
• Standard dimensions: 50.7 cm × 34.0 cm × 55.0 cm; 47 kg
• Rack-mount option (M1): 48.3 cm × 31.2 cm × 52.3 cm; 34 kg
– Compatibility & Integration
The 150A220 integrates with Amplifier Research control accessories CP2001 and CP3000 for remote and automated operation in multi-instrument test systems.
