The Bertan Associates 200-C488 is a high-voltage power supply interface module designed to provide IEEE-488 (GPIB) control and monitoring capabilities for Bertan Series 205A/210 and 230 high-voltage power supplies. This interface enhances the versatility of these power supplies by enabling remote programming, status monitoring, and additional functions such as programmable overload detection and response.
### Technical Specifications
**Interfaces**
* **GPIB (IEEE-488):** Allows for intelligent remote IEEE-488 programming and monitoring of compatible Bertan power supplies.
* Features an eight-position DIP switch for setting a unique bus address in the range of 0 to 30.
* Utilizes standard Chip Select and Write Enable protocols for register modes, enabling it to act as a memory-mapped register or an I/O port.
* **Connection to Power Supply:** Connects to the Bertan Series 205A/210 or 230 power supply via a single seven-conductor cable. The user is supplied with mating connectors and must solder the conductors to the required length.
* **Remote TTY or RS-232C Control:** Capable of remote control at selectable baud rates from 110 to 9600.
**Power Requirements**
* **Input Voltage:** 115 VAC or 230 VAC, switch-selectable.
* Input AC line voltage required is 115/230 VAC ±10%, 50-60 Hz, single phase.
* **Power Consumption:** Approximately 2 amps at 115 VAC and 1 amp at 230 VAC for the Series 225 (mentioned for context, exact for 200-C488 not specified).
**Physical**
* **Form Factor:** Single 19-inch rack-mountable unit.
* **Height:** 3-1/2 inches.
**Compatibility**
* **Bertan Series 205A/210 High Voltage Power Supplies:** The 200-C488 is specifically designed to interface with these series.
* **Bertan Series 230 Power Supplies:** Also compatible with the Series 230.
* **Bertan Series 210 Power Supplies:** Mentioned as compatible with the 200-C488 for IEEE-488 interface.
* **Remote Control:** Can be used with the Bertan B-HiVE minicomputer controlled enclosure with the appropriate interface module.
**Operational Features**
* **Duplication of Front Panel Operation:** Replicates the functions available on the power supply’s front panel.
* **Programmable Overload Detection and Response:** Provides advanced functions beyond standard front panel operations.
* **Remote Programming and Monitoring:** Allows the GPIB controller to send commands to program the output, set user-programmable parameters, and read back output meter readings and status information.
* **Remote/Local Control Switch:** The power supply must be configured to the “Remote” position for GPIB system operation.
### Why Choose Aumictech for Bertan Associates 200-C488?
At Aumictech, we specialize in supplying high-end B2B technical equipment. Whether you need intelligent remote programming, comprehensive status monitoring, or seamless integration with your existing test and measurement systems, our team ensures the Bertan Associates 200-C488 delivers maximum performance for your application.
