The HP/Agilent 6033A is a single-output DC power supply delivering 240 W of rated power for system integration and benchtop test environments. It spans 0–20 V DC and 0–30 A DC with autoranging capability, ensuring maximum power delivery across a wide operating envelope without manual range switching. The supply maintains constant voltage and constant current modes simultaneously, with programming accuracy of 0.035 % for voltage and 0.09 % to 0.3 % for current at 25 °C ±5 °C.
Technical Specifications
• Output Power: 240 W rated; 200 W typical
• Voltage Range: 0–20 V DC
• Current Range: 0–30 A DC
• Programming Accuracy: Voltage 0.035 %; Current 0.09 % to 0.3 % (range-dependent)
• Load Regulation: Voltage 0.01 % + 2 mV to 0.01 % + 5 mV; Current 0.01 % + 5 mA to 0.01 % + 10 mA
• Line Regulation: Voltage and Current both 0.01 %
• Ripple and Noise (typical): Voltage 8 mV rms, 50 mV peak-to-peak; Current 15 mA rms
• Transient Response: 2 ms for 10 % step change; 100–150 mV overshoot
• Remote Sensing: Up to 2 V drop per lead; regulation maintained below 0.5 V
• AC Input Options: 100 Vac (75 % output derate), 120 Vac, 220 Vac, or 240 Vac; 47–63 Hz
• AC Input Current: Up to 24 A at 100 Vac
• DC Floating Voltage: ±550 V
– Key Features
• Autoranging topology eliminates manual voltage/current range selection
• Analog and resistance control for output voltage and current programming
• Built-in overvoltage and overcurrent protection
• Remote sense terminals support up to 2 V lead drop compensation
– Typical Applications
Demanding test systems, component characterization, and power sequencing applications requiring stable, programmable DC delivery with minimal ripple.
– Compatibility & Integration
Supports SCPI commands and VXI plug & play drivers for automated test environments. Up to 16 units can be daisy-chained via serial link and controlled through a single GPIB address for distributed power delivery in multi-channel test configurations.
