The HP/Agilent 6205C is a dual-output regulated power supply delivering two independent, electronically controlled channels with selectable voltage ranges and integrated current limiting. Each output operates at 0–20 VDC / 0.6 A or 0–40 VDC / 0.3 A, accommodating diverse test requirements across electronics development, circuit characterization, and laboratory bench work. Precision 10-turn voltage controls enable fine adjustment, while integrated volt/ampere metering and front/rear accessible terminals support both local operation and remote programming via resistance or voltage control. Load regulation holds within 0.01% + 4 mV and line regulation within 0.01% + 4 mV across the full input range. Output noise remains below 200 µVrms, with temperature stability of 0.02% + 1 mV/°C and long-term drift under 0.10% + 5 mV after warm-up. Remote sensing provisions and adjustable current limiting on each section support demanding test scenarios. The unit accepts 115 VAC ±10% or 230 VAC ±10% at 48–440 Hz, drawing 31 W at full load, and operates via convection cooling without active ventilation.
Technical Specifications
• Outputs: 2 independent, dual-range channels
• Voltage Range per Output: 0–20 VDC or 0–40 VDC (user-selectable)
• Current per Output: 0.6 A @ 0–20 VDC; 0.3 A @ 0–40 VDC
• Maximum Output Power: ~24 W per output
• Load Regulation: <0.01% + 4 mV
• Line Regulation: <0.01% + 4 mV
• Output Noise: <200 µVrms / 1 mV pk-pk
• Temperature Coefficient: <0.02% + 1 mV/°C
• 8-Hour Drift: <0.10% + 5 mV (post warm-up)
• Output Impedance: 25 mΩ + 1 µH
• Input Power (115 VAC, full load): 31 W @ 0.35 A
• Input Voltage: 115 VAC ±10% or 230 VAC ±10%
• Input Frequency: 48–440 Hz
– Key Features
• Dual independent outputs with fixed or adjustable current limiting per section
• 10-turn precision voltage adjustment knobs
• Integrated volt/ampere meter with function and range switching
• Rear-panel remote sensing terminals for load compensation
• Resistance programming: 200 Ω/V; voltage programming: 1 V/V
• Passive thermal design—no cooling fans
– Typical Applications
• Electronics circuit testing and development
• Prototype power distribution and verification
• Component characterization under variable load
• Laboratory and bench-top measurement systems
– Compatibility & Integration
Front and rear output terminals accommodate flexible cabling. Optional hardware supports side-by-side mounting of two units in 19-inch relay racks. Dimensions: 3.5 in. (H) × 8 in. (W) × 12.6 in. (D); weight 10 lbs net.
