The Keithley 2260B-80-27 is a programmable DC power supply engineered for R&D, quality control, and production test environments that demand precise voltage and current control. Operating at 80V, 27A, and 720W, it integrates into automated test systems where speed and flexibility drive test cycle efficiency. The unit delivers ±0.5% voltage accuracy and ±1% current accuracy, with a rapid 1 ms transient recovery time to load changes. Fast discharge capability and programmable rise/fall times (0.1 V/s to 160 V/s for voltage; 0.01 A/s to 144 A/s for current) protect sensitive loads from inrush damage and enable dynamic load testing.
Technical Specifications
Output Performance:
• Single output delivering 0–80 V and 0–27 A (720 W maximum)
• Voltage accuracy: ±0.5% of rated output voltage
• Current accuracy: ±1% of rated output current
• Temperature stability: 200 ppm/°C after 30-minute warmup
• Transient recovery: 1 ms to load changes
Protection & Limits:
• Overvoltage Protection (OVP): 8–88 V range, ±2% setting accuracy
• Overcurrent Protection (OCP): 2.7–29.7 A range, ±2% setting accuracy
• Overtemperature Protection (OTP): Output shutdown on thermal event
• Low AC Input Protection (AC-FAIL): Output shutdown on mains failure
• Power Limit Protection: ~105% of rated power (fixed)
Input & Interface:
• Input: 85–265 V AC single-phase, 50/60 Hz (operation at 85–132 V AC or 170–265 V AC)
• Communication: USB, LAN; optional GPIB
• Analog control interface for external output regulation
– Key Features
• Programmable internal resistance for battery output simulation
• Constant current priority mode reduces voltage and current overshoot on LED loads
• Independent rise and fall time control—voltage range 0.1–160 V/s; current range 0.01–144 A/s
• Fast discharge eliminates residual output voltage rapidly
– Typical Applications
Component validation, power device characterization, LED driver testing, battery emulation, and production test automation across industries requiring multi-kilowatt load simulation.
– Compatibility & Integration
USB and LAN connectivity support direct system integration. GPIB option available for legacy automated test setups. Analog control input enables closed-loop feedback systems and external regulator circuits.
