The Kepco BOP72-5M is a high-speed bipolar operational power supply and amplifier delivering ±72V and ±5A in true four-quadrant operation. It functions simultaneously as power source and sink, sourcing and sinking current across its entire voltage range while passing through zero without polarity switching. Designed for laboratory and industrial test environments, the unit executes rapid programmed changes and arbitrary waveform generation with minimal settling time. Its dual control circuits automatically cross over between voltage and current limits, supported by a zeroable preamplifier and fast programming modes. A 50-terminal rear user port provides complete access to all control signals and status flags, enabling integration into automated test systems and feedback loops.
## Technical Specifications
**Output Characteristics**
• Voltage Range: ±72V
• Current Range: ±5A
• Power Rating: 400W
• Voltage Ripple and Noise: <0.01% of Eo
• Current Ripple and Noise: <0.05% of Eo or 3 mV p-p (whichever is greater)
• Harmonic Distortion: <0.5% (small signal, 2V peak-to-peak, no load)
**Dynamic Performance**
• Voltage Slew Rate (Slow): 2V/µsec
• Fast Programming Time Constant: 12 µsec
• Slow Programming Time Constant: 250 µsec
• Large Signal Fast Frequency Response: 25 kHz
• Large Signal Slow Frequency Response: 1 kHz
**Output Impedance (Worst Case at 125V a-c)**
• Voltage Mode: 3 mΩ series resistance, 7 kΩ series inductance
• Current Mode: 23 kΩ shunt resistance, 0.17 µF shunt capacitance
**Input Power**
• Factory Configuration: 105-125V a-c, 50-65 Hz (9A at 115V a-c)
• Alternate Configuration: 210-250V a-c, 50-65 Hz (5A at 230V a-c) via jumper
## Key Features
• Four-quadrant bipolar operation with continuous polarity control
• Separate voltage and current control circuits with automatic limit crossover
• Dual programming speed modes for rapid or smooth response
• Field-reconfigurable input voltage via jumper selection
• Complete I/O access through 50-terminal rear connector
## Typical Applications
• Precision battery simulation and testing
• Power amplification for transducers and actuators
• Arbitrary waveform synthesis and reproduction
• Dynamic load simulation and device characterization
• Feedback control systems requiring bipolar drive
## Compatibility & Integration
The 50-terminal user port provides direct access to voltage command, current command, output monitoring, and all status flags, enabling integration with external controllers, data acquisition systems, and feedback networks.
