The Kepco RKW15-100K is a 1.5 kW programmable DC power supply module delivering 15 V DC at 100 A maximum output. Built on switch-mode topology with Power Factor Correction, it accepts universal AC input (85–265 V AC, 47–66 Hz) or DC input (110–370 V DC), achieving typical efficiency of 82–86%. The unit employs a 135 kHz forward converter and 80 kHz PFC boost converter, housed in a fully enclosed, fan-cooled chassis.
Output voltage adjusts from 10.5 to 18.0 V DC via external 0–5 V programming signal or resistance network. Current limit operates rectangularly with automatic recovery after transient overload; sustained overcurrent triggers shutdown after 30 seconds. Overvoltage protection shuts down output; recovery requires AC input recycle (30-second delay) or RC terminal reset. Remote error sensing compensates up to 0.4 V per load wire. Input surge protection uses thermistor circuit with fused input against shorts.
Master-slave paralleling with current balancing enables multi-unit configurations. The RKW15-100K supports remote on-off control and remote voltage trimming. Conducted EMI meets FCC Class B, VCCI Class B, EN55011-B, and EN55022-B. The module conforms to EN60950 and carries CE marking.
Technical Specifications
• Rated Output Power: 1.5 kW (1500 W)
• Output Voltage: 10.5–18.0 V DC (rated 15 V DC)
• Maximum Output Current: 100 A DC
• AC Input: 85–265 V AC, 47–66 Hz, universal range
• DC Input Option: 110–370 V DC, polarity insensitive
• Power Factor Correction: Active (PFC)
• Switching Frequency: 135 kHz (forward), 80 kHz (boost)
• Efficiency: 82–86% typical
• Maximum Input Current: 4.4 A RMS (100–120 V AC); 2.2 A RMS (200–240 V AC)
– Key Features
• Programmable output via 0–5 V external signal or resistance
• Overvoltage and overcurrent protection with automatic recovery
• Remote error sensing (0.4 V compensation per load wire)
• Remote on-off control and voltage trimming
• Master-slave paralleling with current balance
• Input surge suppression and fused protection
• FCC Class B and EN55022-B EMI compliance
• EN60950 safety certification, CE marked
– Typical Applications
Industrial power distribution, multi-unit parallel systems, high-current DC loads, and applications requiring remote control and monitoring.
– Compatibility & Integration
Supports external voltage or resistance programming. RC terminals enable remote control functions. Current balancing allows scalable multi-unit deployment without external logic.
