The Keysight EXR604A Infiniium EXR-Series Oscilloscope delivers 6 GHz bandwidth across four analog channels for advanced signal integrity and jitter characterization. This instrument captures complex waveforms at up to 20 GSa/s simultaneously on all channels, with optional sampling rates reaching 80 GSa/s on a single channel. Deep memory architecture—standard 64 Mpts expandable to 1 Gpts per channel—enables extended record lengths for detailed transient analysis and protocol decode. The 15.3-inch capacitive touchscreen display refreshes at over 500,000 waveforms per second, delivering real-time visibility into signal behavior.
Technical Specifications
Acquisition
• Bandwidth: 6 GHz
• Channels: 4 analog inputs (BNC)
• Sample rate: 20 GSa/s (all channels) or 80 GSa/s (single channel, optional)
• Memory: 64 Mpts standard; up to 1 Gpts per channel (optional)
• Vertical resolution: 10 bits (12 bits with high-resolution mode)
• Input impedance: 1 MΩ ±1% (10 MΩ option) or 50 Ω ±1%
• Vertical sensitivity: 1 mV/div to 10 V/div
• ENOB: 7.5 bits at 20 GSa/s
Triggering
• Modes: Edge, Glitch, Pattern, Video, Protocol, Runt, Setup/Hold, Sequence
• Trigger jitter: 500,000 waveforms/second
• Front panel: 4× BNC inputs, external trigger input, USB 2.0 host
• Rear panel: 10/100/1000 Base-T Ethernet, USB device port, HDMI output, probe compensation output
Analysis
• 50+ automatic measurements (amplitude, frequency, rise/fall time, pulse width)
• Waveform math: Add, Subtract, Multiply, Divide, FFT (up to 1M points)
• Jitter analysis: RBW, RJ, DJ, TIE, eye diagrams
• Protocol support: I2C, SPI, UART, CAN, LIN, USB, Ethernet (software-dependent)
• Signal integrity: Impedance, return loss, S-parameters
Power & Physical
• Power consumption: <400 W typical
• Input: 100–240 VAC, 50/60 Hz
– Key Features
• Simultaneous 4-channel acquisition at 20 GSa/s eliminates external multiplexing for multi-signal analysis
• Optional 80 GSa/s single-channel mode captures ultra-fast transients with minimal aliasing
• Sub-0.3 UI trigger jitter enables precise timing measurements on high-speed signals
• FFT to 1M points supports detailed frequency-domain characterization
• Protocol analysis decodes serial buses in real time
– Typical Applications
• High-speed digital signal integrity verification
• Serial protocol debugging (I2C, SPI, CAN, USB, Ethernet)
• Jitter and timing analysis on clock and data signals
• Eye diagram acquisition for optical and electrical standards compliance
• Transient capture and spectral analysis
– Compatibility & Integration
Gigabit Ethernet and USB connectivity enable remote instrument control and automated test sequences. HDMI output supports external display integration for lab environments or monitoring stations.
