The NETGEAR FS750T2 is a 48-port 10/100 Mbps Fast Ethernet Smart Switch delivering 13.6 Gbps aggregate bandwidth with enterprise-class management capabilities. It combines 48 auto-sensing Fast Ethernet ports, 2 built-in Gigabit Ethernet ports, and 2 hot-swappable SFP GBIC slots for optional fiber uplinks. Store-and-forward architecture ensures latency below 20 microseconds for 64-byte frames, with an 8,000 MAC address database and 128 KB buffer memory supporting small-to-medium network deployments.
Technical Specifications
• Forwarding Architecture: Store-and-forward
• Aggregate Bandwidth: 13.6 Gbps
• Latency: <20 µs (64-byte frames, 100 Mbps–100 Mbps)
• Buffer Memory: 128 KB
• MAC Address Table: 8,000 entries
• MAC Addressing: 48-bit
• MTBF: 59,880 hours
• Power Consumption: 21 W maximum
– Key Features
• Port Configuration: 48× 10/100 Mbps Fast Ethernet + 2× Gigabit RJ-45 + 2× SFP slots
• Auto-Negotiation: All ports support auto-sensing and auto-negotiating; Auto Uplink™ on all ports
• VLAN Support: IEEE 802.1Q (up to 64 static VLANs), port-based VLAN (up to 50)
• QoS: IEEE 802.1p CoS and port-based QoS
• Link Aggregation: IEEE 802.3ad (manual)
• Spanning Tree: IEEE 802.1D protocol support
• Port Mirroring: Full support for traffic monitoring
• Management: Web-based interface, SNMP v1 (RFC 1157), configuration backup/restore, password access control
• DHCP Client: RFC 2131 compliant
• Firmware: Field-upgradeable
– Physical & Environmental
• Dimensions: 1.7 × 17.8 × 8.1 in. (43 × 440 × 205 mm)
• Weight: 7.0 lbs (3.2 kg)
• Form Factor: 1U rack-mountable with included kit
• Operating Temperature: 0–40°C
• Operating Humidity: ≤90% RH, non-condensing
• Operating Altitude: ≤10,000 ft (3,000 m)
– Compatibility & Integration
• IEEE 802.3 10BASE-T and IEEE 802.3u 100BASE-TX compliance
• MIB support: RFC 1213 (MIB II), RFC 1643 (Ethernet), RFC 1493 (Bridge), Private Enterprise MIB
