The NI PXI-6030E is a multifunction data acquisition module for PXI systems, delivering 16 analog input channels at 16-bit resolution with 100 kS/s sampling rate. This module combines analog input, analog output, digital I/O, and counter/timer functionality in a single instrument, eliminating manual calibration through software configuration and one-year calibration intervals. Built on the E Series platform, it provides the accuracy and speed required for measurement automation, signal monitoring, and control applications across industrial, test, and research environments.
Technical Specifications
Analog Input:
• 16 single-ended or 8 differential channels
• 16-bit resolution with ±0.5 LSB relative accuracy
• 100 kS/s maximum sampling rate
• Bipolar (–Vref to +Vref) and unipolar (0 to Vref) polarity selection
• ±1 LSB maximum differential non-linearity
• Guaranteed 16-bit monotonicity
• 100 GΩ input impedance in parallel with 100 pF
• Analog input triggering supported
Analog Output:
• 2 channels, 16-bit resolution
• Software-selectable ranges: bipolar ±10 V or unipolar 0–10 V
• 0.1 Ω output impedance
• ±5 mA current drive, DC coupling
Digital I/O & Timing:
• 8 TTL/CMOS-compatible digital I/O lines
• Two 24-bit TTL/CMOS-compatible up/down counter/timers
• 4-bit frequency scaler (1 MHz)
Electrical & Physical:
• 3.5 A typical power consumption at +5 VDC (±5%)
• 68-pin male SCSI-II connector
• 6.3 × 3.9 inch form factor
• Indoor operation up to 2,000 m altitude
– Key Features
• PXI Specification Rev 1.0 compliance with automatic bus configuration
• Software-configurable with zero manual adjustments
• NIDAQmx driver compatibility with LabVIEW and LabWindows/CVI
• High input impedance minimizes signal loading
• Expandable through NI SCXI and SCC signal conditioning products
• IEC 61010-1, EN 61010-1, UL 61010-1, and CAN/CSA-C22.2 No. 61010-1 certified
– Typical Applications
• Industrial process monitoring and control
• Sensor data acquisition and analysis
• Test automation and measurement systems
• Waveform generation and triggering
– Compatibility & Integration
Integrates directly into PXI chassis. Over 70 signal conditioning options available. Compatible with NI SCXI and SCC modules for expanded channel counts and analog signal processing.
