The Kepco Power Ten 3200D-300-16 is a programmable DC power supply delivering 3200 W across a 0–300 V, 0–16 A output range. Built for industrial and laboratory test environments, it combines constant current/constant voltage operation with automatic crossover to meet demanding precision power requirements.
Technical Specifications
Output Ratings
• Rated Power: 3200 W
• Output Voltage: 0–300 V
• Output Current: 0–16 A
• Regulation (Line/Load): 0.1% voltage, 0.5% current
• Temperature Coefficient: 0.02%/°C (voltage set point), 0.03%/°C (current set point)
Stability & Response
• Long-term: ±0.05% of set point per 8 hours after 30 min warm-up
• Temperature Drift: 100 ppm/°C in both CV and CC modes
• Transient Recovery: ±2% of set voltage within 10 ms for 30% current step load
• Peak-to-Peak Ripple & Noise: Low (per series specification)
Display & Measurement
• Display Accuracy: Voltage ±(0.5% + 2 digits), Current ±(0.5% + 2 digits)
– Key Features
• Analog programming: 0–5 V input at 1 MΩ impedance with ±0.5% accuracy
• Digital control: 16-bit ADC and 16-bit DAC via RS232, USB, or RS485
• Front panel encoder adjustment for voltage and current setpoints
• Protection against overvoltage, overcurrent, short circuit, foldback conditions, and overtemperature
• Configurable output modes: Set, Over Voltage, Under Voltage, Foldback, Remote, and Output control
• CE and TUV certifications
– Typical Applications
• Systems integration and component testing
• Industrial power quality validation
• Laboratory R&D and device characterization
• Field-replaceable unit (FRU) burn-in and functional test
– Compatibility & Integration
Remote programming via RS232, USB, and RS485 interfaces supports both custom protocols and optional IEEE 488.2/SCPI command sets for integration into automated test environments.
