The Power Ten 3400D-10200 is a 10 kW DC power supply engineered for demanding industrial and laboratory applications requiring stable, low-noise power delivery. This unit maintains tight voltage regulation and fast transient response, making it suitable for precision test benches, manufacturing processes, and systems demanding accurate power control with remote monitoring capabilities.
Technical Specifications
Regulation & Stability
• Voltage regulation: 0.1% of maximum rated output (line or load)
• Current regulation: 0.5% of maximum rated output
• Long-term stability: ±0.05% of set point per 8 hours after 30-minute warm-up at fixed line, load, and temperature
• Transient response: 30% current step load recovers to within ±2% of set voltage in ≤10 msec
Output Specifications
• Variable DC output voltage and current (exact ranges depend on model variant)
• Adjustable constant voltage (CV) or constant current (CC) operation with automatic crossover
• Low peak-to-peak ripple and noise
• Output interface: Bus bars with 0.390″ interface holes for outputs ≤50 VDC
• Remote sensing terminals compensate for line drop, ensuring accurate voltage delivery at the load
Input Power
• Standard: 190–253 VAC, 47–63 Hz (single or three-phase, depending on model)
• Optional: 360–440 VAC or 432–528 VAC, 47–63 Hz
– Key Features
• Remote programming via resistance, control voltage, or optional IEEE 488.2 / RS-232 (SCPI Protocol) for full computer control and monitoring
• On/Off control via contact closure, 6–120 VDC, or TTL/CMOS switching
• Output voltage and current monitoring, OVP limit setting, and summary fault status reporting
• Optional control isolation to mitigate ground loop currents and high ambient noise effects
– Typical Applications
Precision test systems, component characterization, high-reliability manufacturing, electrochemical processes, and laboratory research requiring stable, monitored DC power with minimal output noise and fast load-step recovery.
– Compatibility & Integration
Supports both analog remote programming and digital interfaces (optional IEEE 488.2 / RS-232 with SCPI). Control isolation available for systems with multiple power supplies or high ground loop impedance.
