The Power Ten P63C-20500 is a 10 kW DC power supply delivering 0–20 VDC at up to 500 ADC, engineered for demanding industrial and laboratory environments. Built on advanced PWM and zero-crossing switching topology, this unit provides tight voltage regulation of 0.1% and current regulation of 0.5%, with output ripple controlled to 75 mV peak-to-peak. Stability reaches ±0.05% per 8 hours after warm-up, while transient response recovers within ±2% of set voltage in 10 msec following a 30% current step load.
Technical Specifications
Output Performance
• Output: 0–20 VDC, 0–500 ADC (10 kW)
• Ripple and noise: 75 mV peak-to-peak
• Voltage regulation: 0.1% of rated output
• Current regulation: 0.5% of rated output
• Stability: ±0.05% per 8 hours at fixed line, load, and temperature (post 30-minute warm-up)
• Voltage temperature coefficient: 0.02%/°C
• Current temperature coefficient: 0.03%/°C
• Transient recovery: ±2% within 10 msec for 30% current step
Input Specifications
• Input: 190–253 VAC, 47–63 Hz, 3-phase
• Input current @ 208 VAC: 41 A typical at full 10 kW output
• Input connector: 3-wire + GND (#10-32 threaded studs)
Interfaces & Control
• DC output: Bus bars (0.390″ or 0.410″ interface holes)
• Rear panel: DB 25-pin female connector for remote monitoring and control
• Remote control: On/Off via contact closure (6–120 VDC, TTL/CMOS)
• Output monitoring: Voltage and current readback available
• Remote sensing: Terminals for load-point voltage sensing
• Remote programming: Resistive (0–5 kΩ), 0–5 VDC, or 0–10 VDC inputs
• Optional: IEEE 488.2 and RS 232 programming with SCPI protocol
Physical & Environmental
• Dimensions: 19″ W × 5.25″ H × 22″ D
• Weight: 80 lbs
• Cooling: Internal fans
• Operating temperature: 0 to +50°C (no derating)
• Storage temperature: −20 to +70°C
– Key Features
• Direct bus bar interface for high-current applications
• Precision voltage and current regulation suitable for process control and burn-in
• OVP limit setting and summary fault status
• Flexible remote programming via analog, resistive, or digital protocols
• Compact 5.25″ rack height for standard 19″ panel mounting
– Typical Applications
Semiconductor burn-in, process control, medical systems, production test, electromagnet excitation, ATE, battery charging, ion implant systems, radar, high-power laser supplies, and research laboratories.
