The Power Ten R83C-100-100 is a single-output DC power supply engineered for industrial and laboratory system testing where precise voltage and current regulation are essential. Delivering up to 10 kW across 100.0 V and 100.00 A, this unit combines tight line and load regulation with excellent stability and fast transient response, making it suitable for demanding characterization and validation tasks.
Technical Specifications
• Output: 100.0 V, 100.00 A maximum
• Power Output: Up to 10 kW
• Input: 3-phase
• Voltage Regulation: 0.1% of maximum rated output
• Current Regulation: 0.5% of maximum rated output
• Stability: ±0.05% of set point per 8 hours (after 30 minutes warm-up at fixed line, load, and temperature)
• Temperature Coefficient: 0.02%/°C
• Transient Response: 30% current step load recovers to within ±2% of set voltage in 10 msec
• Ripple and Noise: Low peak-to-peak characteristics
– Key Features
• Remote programming via IEEE 488.2 and RS 232 (optional) with SCPI protocol support
• Programmable voltage and current output with soft limits
• Over-voltage protection (OVP) with masking capability
• Output enable/disable and hold/trigger functions
• Full readback of measured and programmed values, status registers, and fault codes
• Isolated analog control option to prevent ground loops
• Remote sensing terminals for load-point voltage regulation
• On/off control via contact closure (6-120 VDC, TTL, or CMOS)
– Typical Applications
System integration testing, component characterization, prototype validation, and laboratory research requiring stable, precisely regulated DC power with remote programmability.
– Compatibility & Integration
Supports SCPI commands for computer automation. Isolated analog and remote sensing options accommodate diverse integration architectures. 5-1/4″ (3U) rackmount form factor enables efficient test bench consolidation.
