The Rohde & Schwarz RTO2002 is a 2-channel digital oscilloscope delivering 600 MHz bandwidth for signal analysis across electronics development, validation, and fault detection. This benchtop instrument combines high sample rates, deep memory, and up to 16-bit vertical resolution to capture and analyze complex signals with minimal noise. The capacitive touchscreen with gesture control and SmartGrid customization enable rapid waveform navigation. Time-correlated frequency, protocol, and logic analysis functions address multi-domain measurement challenges in a single platform.
Technical Specifications
• Bandwidth: 600 MHz
• Channels: 2 analog channels (expandable to 18 with optional RTO-B1 MSO module)
• Sample Rate: 10 Gsample/s per channel
• Memory Depth: 50 Msample per channel (standard); expandable to 2 Gsample per channel (2 Gsample total memory)
• Single-Channel Mode: Up to 100 Msample per channel
• Vertical Resolution: Up to 16-bit (High Definition mode)
• Waveform Update Rate: Up to 1,000,000 waveforms/s
• Input Impedance: 50 Ω ± 1.5%; 1 MΩ ± 1% at 15 pF
• Input Sensitivity (50 Ω): 1 mV/div to 1 V/div (500 μV to 1 V optional)
• Input Sensitivity (1 MΩ): 1 mV/div to 10 V/div (500 μV to 10 V optional)
– Key Features
• Excellent signal fidelity with very low noise acquisition
• Zone trigger function in both time and frequency domains
• External trigger input and output capabilities
• Integrated protocol analysis: I2C, SPI, UART/RS-232, CAN, LIN, MIPI D-PHY, eMMC, Ethernet (10BASE-T, 100BASE-TX, 1000BASE-T, 100BASE-T1, 1000BASE-T1), DDR3, DDR4, DDR5, USB, FlexRay, I²S, CAN-FD, SENT, MIPI RFFE, 8b10b, MDIO, SpaceWire, PCIe, CXPI
• Logic analysis functions
• DVI and DisplayPort outputs for external monitoring
• Network and remote operation support
– Typical Applications
Electronics development and testing; sporadic signal fault detection; multi-domain protocol and frequency analysis; DDR memory validation; high-speed serial interface characterization.
– Compatibility & Integration
Mixed Signal Oscilloscope (MSO) upgrade via RTO-B1 option adds 16 digital channels and can be retrofitted to existing instruments.
