The Tektronix 196-3459-00 is a test lead set engineered for use with the P6417 and P6418 logic analyzer probes. This accessory enables reliable electrical connections between 16- and 17-channel logic analyzer probes and target systems under test, supporting accurate data acquisition across Tektronix TLA Series analyzers. The lead set provides 20 kΩ input resistance and integrates with probes offering 1.8 meter cable length, sub-nanosecond channel-to-channel skew, and threshold accuracy of ±100 mV for stable measurement performance in digital circuit debugging and validation.
Technical Specifications
• Input Resistance: 20 kΩ
• Compatible Probe Models: P6417, P6418
• P6417 Channels: 17 (16 data + 1 clock/data)
• P6418 Channels: 16 data + 1 clock/data
• Probe Cable Length: 1.8 meters (6 ft)
• Threshold Accuracy: ±100 mV
• Channel-to-Channel Skew: ≤1 ns
• Input Capacitance (Data): 2.0 pF typical
• Input Capacitance (Clock/Qual): 2.0 pF typical
• Minimum Slew Rate: 0.2 ns
• Maximum Operating Signal: 6.5 Vp-p
• Minimum Input Pulse Width: 2 ns
• Maximum Nondestructive Input Signal: ±15 V
• Propagation Delay (Probe Tip to Module): 7.33 ns
– Key Features
• Designed for P6417 and P6418 logic analyzer probes
• Low input capacitance (2.0 pF) minimizes circuit loading
• Tight timing specifications with ≤1 ns skew between channels
• Supports 0.100 in. and 2 mm pin spacing on target connections
• Maintains signal integrity across 6.5 Vp-p operating range
• Withstands overvoltage conditions up to ±15 V nondestructively
– Typical Applications
• Digital circuit debugging and protocol analysis
• Multi-channel signal acquisition on embedded systems
• Logic state validation during hardware development
• Timing measurements in synchronous digital designs
– Compatibility & Integration
• Tektronix TLA600 Series Logic Analyzers
• Tektronix TLA700 Series Logic Analyzers
• Tektronix TLA Series (general compatibility)
