The Tektronix 2213 is a dual-channel, 60 MHz analog oscilloscope engineered for general-purpose electronic testing and measurement across laboratory and field environments. It delivers stable, well-defined traces on an 80 × 100 mm CRT with 10 kV accelerating potential, providing excellent display intensity. The instrument combines calibrated vertical deflection from 2 mV/div to 10 V/div with horizontal sweep speeds ranging from 0.5 s/div to 50 ns/div, extended to 5 ns/div with the X10 magnifier. Dual-channel architecture, flexible triggering modes, and standard probe compatibility make this scope suitable for signal acquisition, circuit debugging, and maintenance work across analog and mixed-signal applications.
Technical Specifications
• Bandwidth: DC to 60 MHz (2213); 50 MHz at 2–10 mV/div, 60 MHz at 20 mV/div and above (2213A); switchable 10 MHz limit available (2213A)
• Rise Time: 7 ns (2 mV/div to 10 mV/div); 5.8 ns (20 mV/div and above)
• Vertical Deflection Factors: 2 mV/div to 10 V/div, ±3% accuracy
• Input Coupling: AC, GND, DC; AC coupling low-frequency limit approximately 10 Hz
• Horizontal Sweep Speeds: 0.5 s/div to 50 ns/div; 5 ns/div with X10 magnifier
• Variable Sweep Control: Continuously adjustable to 2.5× the calibrated setting (slowest sweep to 1.25 s/div)
• CRT Display: 80 × 100 mm cathode-ray tube, 10 kV accelerating potential
– Key Features
• Dual independent input channels with switchable coupling modes
• Peak-to-peak automatic triggering with manual level control across the full bandwidth
• Normal, Automatic, and TV FIELD triggering modes
• Internal auto/normal trigger sensitivity from 0.4 div below 2 MHz, rising to 1.5 div at 60 MHz
• External DC-coupled trigger sensitivity: 50 mV p-p up to 2 MHz, 250 mV p-p at 60 MHz
• Lightweight, rugged design for portability without sacrificing stability
– Typical Applications
• Analog circuit characterization and troubleshooting
• Signal acquisition and waveform analysis to 60 MHz
• Field service and maintenance testing
• General electronics laboratory measurements
– Compatibility & Integration
• P6120 10× probes (2213)
• P6122 10× probes (2213A)
• Standard scope probe interfaces
