The Tektronix MSO2014B is a mixed-signal oscilloscope delivering four analog channels and 16 digital channels in a single instrument for debug and analysis of complex electronic designs. Engineers and technicians use it to identify, capture, and analyze signal anomalies across analog and digital domains simultaneously. The platform combines 100 MHz analog bandwidth, up to 1 GS/s sampling on digital inputs, and advanced triggering—including serial packet decode for I2C, SPI, CAN, LIN, and UART—to accelerate fault isolation and system characterization.

Technical Specifications

Analog Channels
• 4 channels, 100 MHz bandwidth
• Input sensitivity: 2 mV/div to 5 V/div
• Input impedance: 1 MΩ ±2%, 11.5 pF ±2 pF
• DC gain accuracy: ±3% (10 mV/div to 5 V/div); ±4% (2 mV/div to 5 mV/div)
• Maximum input: 300 Vrms with peaks 100:1 at < 100 MHz
• 8-bit vertical resolution

Digital Channels
• 16 channels (D15–D0) with independent threshold control per 8-channel set
• Sample rate: 1 GS/s (D7–D0, 1 ns resolution); 500 MS/s (D15–D8, 2 ns resolution)
• Threshold selections: TTL, CMOS, ECL, PECL, user-defined (±20 V)
• Maximum input voltage: ±40 V
• Minimum voltage swing: 500 mV pk-pk
• Minimum detectable pulse: 5 ns
• Channel-to-channel skew: 2 ns typical

Acquisition & Triggering
• Maximum sample rate: 1 GS/s (all channels)
• Record length: 1 Mpoint (all channels)
• Waveform capture rate: 5,000 wfm/s
• Peak detect mode: captures pulses ≤ 5 ns
• Serial packet triggering: I2C, SPI, CAN, LIN, RS-232/422/485/UART
• Logic, runt, pulse width, setup/hold, and parallel data triggers
• 29 automated measurements
• FFT analysis standard

– Key Features

• Simultaneous 4-channel analog and 16-channel digital capture
• Protocol-aware triggering and decode for embedded systems
• Multichannel setup and hold violation detection
• 8-bit and 1-bit vertical resolution for analog and digital respectively