The Tektronix MSO54-BW1000 is a 1 GHz mixed-signal oscilloscope built for engineers designing embedded systems, power electronics, automotive electronics, and power supplies. It combines four FlexChannel analog inputs with optional digital logic capability, delivering real-time sample rates of 6.25 GS/s across all channels and waveform capture rates exceeding 500,000 waveforms/s. The 15.6-inch high-definition touchscreen display and intuitive pinch-swipe-zoom interface enable rapid signal analysis and measurement workflows.
Technical Specifications
• Bandwidth: 1 GHz (upgradable)
• Analog Channels: 4 FlexChannel inputs; each configurable as one analog signal or eight digital logic inputs (with optional TLP058 logic probe)
• Digital Channels: Up to 32 (with optional TLP058 logic probe)
• Real-Time Sample Rate: 6.25 GS/s across all analog and digital channels
• Interpolated Sample Rate: 500 GS/s
• Record Length: 62.5 Mpoints standard; expandable to 125 Mpoints (5-RL-125M upgrade) or 500 Mpoints on select configurations
• Waveform Capture Rate: >500,000 waveforms/s; >5,000,000 waveforms/s in FastFrame™ mode
• Vertical Resolution: 12-bit ADC; up to 16-bit in High Resolution mode (12-bit at 1.25 GHz, 16-bit at 50 MHz)
• Calculated Rise Time: 400 ps
• Input Impedance: 1 MΩ (passive voltage probe, <4 pF capacitive loading per channel)
• Display: 15.6-inch HD LCD (1920 × 1080) capacitive touchscreen
– Key Features
• 36 standard automated measurements with statistics, trend plots, and results tables
• Trigger types include edge, pulse width, runt, timeout, window, logic, setup/hold, rise/fall time, parallel bus, sequence, and visual trigger
• Advanced analysis via math functions, FFT, and equation editor
• Time trend, histogram, and spectrum plots
• Jitter analysis (TIE and phase noise)
• Optional advanced jitter and eye analysis (5-DJA) and advanced power analysis (5-PWR) packages
• Serial protocol analysis support for 25+ protocols: I2C, SPI, RS-232/422/485/UART, SPMI, CAN, CAN FD, LIN, FlexRay, SENT, USB 2.0, Ethernet, I2S, LJ, RJ, TDM, MIL-STD-1553, and ARINC 429
• One TPP1000 1 GHz probe included per channel; low capacitance probes (3.9 pF) available
– Typical Applications
Embedded system design, power electronics characterization, automotive electronics validation, and power supply design and troubleshooting.
– Compatibility & Integration
Supports optional logic probes (TLP058) for expanded digital channel capacity and optional analysis modules for advanced measurements.
