The Teledyne LeCroy T3EL15060P is a single-channel programmable DC electronic load delivering 300 W across a 1 V to 150 V range with 0–60 A capability. Built for R&D, product validation, and quality assurance in both benchtop and automated test environments, this unit excels at characterizing power supplies, batteries, and electronic components across low to medium power applications.
Technical Specifications
Power and Voltage Rating: 300 W maximum; 1–150 V input range; 0–60 A current capability. Operating input: 110 VAC or 230 VAC (100–120 VAC / 200–240 VAC selectable; 90–132 VAC / 180–250 VAC range accepted); 47–63 Hz. Maximum power consumption 90 VA.
Resolution and Measurement: 16-bit resolution with Measurement Category II rating. Supports 10 preset data sets for rapid test configuration.
Operating Modes: Constant Current (CC), Constant Voltage (CV), Constant Resistance (CR), Constant Power (CP), and combined modes (CC+CV, CR+CV, CP+CV). Static, Dynamic, and Sequence operation modes supported. High slew rate of 2.5 A/µs enables rapid transient response.
– Key Features
Sequencing Capability: Normal sequences run up to 1000 steps with timing from 1 ms to 999 h 59 min 59 sec. Fast sequences: up to 1000 steps, 25 µs to 600 ms per step.
Protection Suite: Over Current Protection (OCP), Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Temperature Protection (OTP), and Reverse Voltage Protection (RVP).
Application Functions: Soft Start, Battery Test Automation, OCP Test Automation, and OPP (Over Power Protection) Test Automation.
External Control and Triggering: Analog external control via J1 connector using external voltage or resistance input. Remote Sense capability included. Rear-panel BNC trigger in/out provides sequence control (4.5 V output, minimum 2 µs pulse width, 500 Ω impedance) and external resume capability.
Interface: USB communication. 3.5-inch color LCD display.
– Physical Characteristics
Dimensions: 213.8 × 124 × 400.5 mm; weight 9.719 kg. Active cooling via exhaust fan requires minimum 20 cm clearance from obstructions.
– Compatibility & Integration
Supplied with DC electronic load unit, Quick Start Guide, power cord, and remote sense cables (red and black). USB connectivity integrates with automated test systems and controller software.
