The Teledyne LeCroy T3RC3000-HF is a Rogowski AC current probe engineered for non-invasive, high-accuracy current measurement up to 3,000 A across an extended frequency range of 3 Hz to 23 MHz. The flexible coil design wraps around conductors without circuit modification, ensuring minimal loading on the device under test while capturing both low-frequency and transient phenomena. With a sensitivity of 2 mV/A, maximum noise of 1.4 mV rms, and peak di/dt capability of 80 kA/µs, the probe delivers precise waveform acquisition in power electronics, renewable energy, and component-level R&D environments. The 200 mm coil and 4 m cable support field deployment and benchtop integration. Rated for 5 kV peak insulation with operating temperature range of -40 °C to +125 °C, the T3RC3000-HF powers via battery or AC adapter for flexibility across lab and field conditions.
Technical Specifications
• Current Range: 2 mA to 3,000 A
• Frequency Response: 3 Hz to 23 MHz
• Sensitivity: 2 mV/A
• Maximum Noise: 1.4 mV rms
• Peak Insulation Voltage: 5 kV
• Peak di/dt: 80 kA/µs
• Droop: 2.8%/ms
• Attenuation Ratio: 500
• Insertion Impedance: Very low (few pH)
• Coil Length: 200 mm
• Cable Length: 4 m
• Operating Temperature: -40 °C to +125 °C
• Output Connector: BNC
– Key Features
• Flexible Rogowski coil allows placement around conductors in confined or difficult-access areas
• Zero-insertion impedance design minimizes circuit loading
• No modification to device under test required
• Dual power option: battery or AC adapter operation
• Wide temperature stability for field and laboratory use
– Typical Applications
• Component-level switching analysis (MOSFET, IGBT, inductors, capacitors)
• Power converter development and characterization
• Renewable energy systems monitoring (wind farms)
• System-level current profiling
• Long-term maintenance and diagnostic monitoring
– Compatibility & Integration
BNC output connector compatible with all Teledyne LeCroy and Teledyne Test Tools oscilloscopes featuring 1 MΩ input impedance. Supports standard benchtop and field-portable measurement setups.
