The Yokogawa 702907 is a passive oscilloscope probe rated for 1000 V measurement with a 10:1 attenuation ratio and DC to 200 MHz bandwidth. Designed for precision signal acquisition in laboratory and field environments, it delivers 1.75 ns rise time and 12.0 ns propagation delay with input impedance of 10 MΩ typical. The probe meets EN61010-031 CAT II safety standards and operates reliably across −40°C to +85°C, withstanding over 500 temperature cycles and 60 N cable mount pulling force.
Technical Specifications
• Bandwidth: DC to 200 MHz (−3 dB)
• Attenuation Ratio: 10:1 ±2% at +5 to +40°C; 10:1 ±3% at −40 to +5°C and +40 to +85°C
• Input Resistance: 10 MΩ ±2% typical
• Input Capacitance: 18.0 pF typical
• Matching Input Capacitance: 12 pF to 22 pF typical
• Rise Time: 1.75 ns typical
• Propagation Delay: 12.0 ns typical
• Maximum Input Voltage: ±1000 V (DC + ACpeak) CAT II
• Connector: BNC with probe ID pin
• Cable Length: 2.5 m
• Weight: 70 g probe only
– Key Features
• Wide temperature stability from −40°C to +85°C with humidity-controlled storage to 80% RH at +40°C
• EN61010-031 Measurement Category II 1000 V (DC + ACpeak) safety rating
• Operating altitude to 3000 m; storage altitude to 4600 m
• Pollution Degree 2 environmental classification
• Tested durability across 500+ temperature cycles
• EU RoHS Directive compliant
• Includes B8099MR pincher tip (high-side) and B8099NK safety ground lead (low-side)
– Compatibility & Integration
Compatible with oscilloscopes featuring 1 MΩ input impedance. Factory-optimized for Yokogawa DLM3000, DLM5000, and DLM5000HD series instruments. Optional probe tip adapters available: safety mini clips, fork terminal adapters, small/large alligator clips, and 4 mm conversion adapters with pincher tip or safety banana connectors.
