The Agilent/Keysight 37204A is an HP-IB (IEEE 488) extender that increases communication distance between HP-IB devices far beyond the standard 2-meter limit. It extends HP-IB interfaces to 1250 meters per link via coaxial cable or 3000 meters per link via fiber optic cable (with optional fiber modules). The unit operates transparently with no program modifications required, enabling flexible system layouts for automated test equipment, data acquisition, and control systems. Error correction ensures 100% data integrity across extended links. Multi-point configurations support up to 30 remote sites, and coaxial/fiber links may be mixed within the same system.
Technical Specifications
• Extension Range: 1250 m per link (coaxial cable); 3000 m per link (fiber optic cable with Option 001 or 002)
• Data Transfer Speed: Maximum 60 kB/s
• Configuration Modes: Single-point and multi-point (up to 30 remote sites)
• Link Types: Coaxial (75 Ω BNC) or optical fiber; mixed link topologies supported
• Cable Specifications (Coaxial): 75 Ω impedance, BNC connector, <6.9 dB loss @ 100 MHz per 100 m; Belden 9248 recommended
• Data Integrity: Error correction with chain truncation feature for partial operation after link failure
• Power: 100/120/220/240 Vac ±5/-10%, 48–66 Hz, 10 VA maximum
• Operating Temperature: 0° to 50° C
• Storage Temperature: -40° to +70° C
• Humidity: 5% to 95% non-condensing
• Altitude: Up to 4,600 m (15,000 ft)
– Key Features
• Transparent operation—existing programs run unchanged
• Dual BNC rear-panel connectors for serial link termination
• Status LED indicators for link monitoring
• Front-panel position switch for configuration control
• Fiber optic options provide complete electrical isolation, lightning protection, and spark-free operation in hazardous environments
– Physical Characteristics
• Dimensions: 212 mm W × 71 mm H × 254 mm D
• Weight: 1.72 kg (3.8 lb)
– Compatibility & Integration
The 37204A extends Hewlett Packard Interface Bus (HP-IB) connectivity. It integrates into multi-site systems via coaxial or fiber links and supports mixed topologies. Data transfer speed limitations recommend locating extenders on a separate HP-IB from disk/tape drives.
