The Agilent/Keysight 6201B is a 0-20 VDC, 0-1.5 A programmable DC power supply delivering 30 W maximum output. It operates in constant voltage and constant current modes, providing load and line regulation better than 0.01% + 4 mV (CV) and 0.03% + 250 µA (CC). Output ripple and noise measure less than 200 µVrms in CV mode and 500 µArms in CC mode, with transient recovery under 50 µs following full load current changes. The supply features external voltage or resistance programming at 1000 ohms per ampere, high-speed programming to 30 V/ms, and fast 8-hour stability of 0.1% + 5 mV (CV) and 0.15% + 2.5 mA (CC). Internal impedance ranges from 0.02 ohms DC to 1 kHz, 0.5 ohms 1-100 kHz, and 3.0 ohms 100 kHz to 1 MHz. Temperature coefficient performance reaches 0.02% + 1 mV per °C (CV) and 0.02% + 1 mA per °C (CC). Continuously acting constant current protection safeguards against all overloads and direct short-circuit conditions. Reverse polarity protection via integrated diode across output terminals prevents damage from miswiring. Operating temperature range spans 0°C to 50°C with storage capability to -40°C to +85°C.
Technical Specifications
• Output: 0-20 VDC, 0-1.5 A, 30 W maximum
• Load regulation (CV): <0.01% + 4 mV
• Load regulation (CC): <0.03% + 250 µA
• Line regulation (CV): <0.01% + 4 mV
• Line regulation (CC): <0.01% + 250 µA
• Ripple/noise (CV): <200 µVrms
• Ripple/noise (CC): <500 µArms
• Temperature coefficient (CV): <0.02% + 1 mV/°C
• Temperature coefficient (CC): <0.02% + 1 mA/°C
• 8-hour drift (CV): <0.1% + 5 mV
• 8-hour drift (CC): <0.15% + 2.5 mA
• Internal impedance: 0.02 Ω (DC-1 kHz), 0.5 Ω (1-100 kHz), 3.0 Ω (100 kHz-1 MHz)
• Transient recovery: <50 µs to within 10 mV
• Operating temperature: 0°C to 50°C
• Storage temperature: -40°C to +85°C
– Key Features
• Dual-mode operation: constant voltage and constant current
• High-speed programmable output at 30 V/ms
• External voltage or resistance programming via 1000 Ω/A coefficient
• Integrated overload and short-circuit protection
• Reverse polarity protection
• 30 minute warm-up to stability specification
– Typical Applications
• Laboratory circuit development and testing
• Industrial device power validation
• Electronic component characterization
• Precision measurement system power
– Compatibility & Integration
External programming input accepts voltage or resistance sources for remote control of output levels.
