The Agilent/Keysight 6632B is a 100 W single-output DC power supply engineered for automated test systems requiring precision, speed, and measurement capability. Delivering 0–20 V DC at 0–5 A, this instrument combines benchtop accessibility with system-level programmability to accelerate development cycles and improve test repeatability. High-speed output programming completes in under 4 ms, with response times as fast as 400 µs in fast mode. The 6632B excels at characterizing battery-powered devices, offering precision low-current measurement down to the microamp level and load regulation of 2 mV across the full 0–100% load range.
Technical Specifications
• Output: 0–20 V DC, 0–5 A DC; 100 W maximum
• Load Regulation: 2 mV / 1 mA (0–100% load)
• Programming Accuracy (25°C ± 5°C): Voltage ±10 mV; Current ±(0.05% + 2 mA)
• Voltmeter Accuracy: 0.07% + 15 mV
• Ammeter Accuracy: 0.18% + 9 mA
• Voltage Ripple & Noise (20 Hz–20 MHz): 0.3 mV RMS / 3 mV peak-to-peak (normal mode); 1 mV RMS / 10 mV peak-to-peak (fast mode)
• Current Noise: 2 mA RMS
• Output-Programming Response Time: <2 ms (10/90%, 90/10% rise/fall); 400 µs fast mode
• Voltage Settling: Within 0.025% × rated voltage in <6 ms (2 ms fast mode)
• Command Processing: Average 4 ms (GPIB, display disabled)
• Measurement Time: Average 50 ms per voltage or current reading
• Active Downprogrammer: Sinks rated current for rapid discharge to 0 V
– Key Features
• Precision low-current measurement to microamp resolution
• Sub-4 ms high-speed output programming
• GPIB and RS-232 control interfaces with VXIplug&play driver support
• Low noise output: 0.3 mV RMS in standard mode
• Front-panel or rear-panel binding post options (Option 020)
• Isolation and polarity reversal relay capability (Option 760)
• Rackmount configurations with or without handles (Options 1CM, 1CP)
– Typical Applications
• Battery device characterization and life testing
• Automated component and module validation
• Power supply sequencing and transient response measurement
• Low-current device development and compliance testing
– Compatibility & Integration
Standard GPIB and RS-232 interfaces enable direct integration into automated test benches. VXIplug&play driver availability supports rapid software deployment. AC input voltage selectable for 100, 120, 220, or 230 VAC operation (47–63 Hz). Designed for Installation Category II, Pollution Degree 2 indoor environments up to 2000 m altitude.
