The Anritsu MP2110A BERTWave™ is a high-performance, all-in-one test instrument designed for the evaluation of physical-layer performance in optical modules and devices. It integrates a Bit Error Rate Tester (BERT) and a multi-channel sampling oscilloscope, making it a versatile solution for research and development and manufacturing inspection across a wide range of data rates, from 10 Gbps up to 1.6 Tbps. This integrated approach is engineered to enhance productivity, reduce test times, and lower capital equipment costs for high-speed digital and optical communication systems. The Anritsu MP2110A is particularly well-suited for applications in data centers, core/metro networks, and mobile backhaul/fronthaul, supporting transmission paths such as Ethernet, InfiniBand, Fibre Channel, and various CPRI/RoE standards.
### Technical Specifications
**Sampling Oscilloscope Capabilities:**
* **Bandwidth:**
* Optical: 35 GHz (Single-Mode Fiber – SMF), 25 GHz (Multi-Mode Fiber – MMF)
* Electrical: 40 GHz
* **Sampling Speed:** Up to 250 ksamples/s for 2 channels simultaneously
* **Sensitivity:** -15 dBm (typical, SMF)
* **O/E Noise:** 3.4 µW (typical, SMF)
* **Intrinsic Jitter:** 200 fs rms (typical) (with high-accuracy trigger option)
* **Signal Analysis:** Supports both NRZ and PAM4 signal analysis. Capable of 53-Gbaud analysis with PAM4.
* **Bessel Filter:** Built-in 100-Gbit/s band Bessel filter for measuring optical signals.
* **Clock Recovery Unit (CRU):** Built-in 26/53 Gbaud CRU for both NRZ and PAM4 signals.
* **Measurement Functions:** Includes Jitter analysis (TJ, DJ, RJ), Eye pattern analysis, Mask Margin tests, TDECQ measurement (up to 53 Gbaud for PAM4), NRZ jitter component analysis, Histogram measurement, OMA, SNR, Extinction Ratio, rising/falling edge time, and Duty cycle distortion.
**Bit Error Rate Tester (BERT) Capabilities:**
* **Bit Rates:**
* Standard Configuration: 24.3 Gbit/s to 28.2 Gbit/s
* Optional Configuration (e.g., Option 093): 9.5 Gbit/s to 14.2 Gbit/s (enabling support for 10 GbE and 100 GbE applications)
* **Pattern Generator (PPG):**
* Low Data Jitter: 600 fs rms (typical)
* **Error Detector (ED):**
* High Sensitivity: 25 mV (typical)
* Supports BER measurement of low-amplitude signals.
**General System Features:**
* **Channels:** Up to 4-channel BERT and up to 4-channel sampling oscilloscope integrated into a single unit.
* **Internal PC:** Built-in PC for stable, high-speed measurement processing, eliminating the need for external controllers.
* **Measurement Speed:** Significantly reduced test times, with up to 65% reduction in Eye pattern analysis time due to high sampling speed and automatic Mask Margin tests. A 1 million sample capture can be completed in approximately 5 seconds.
* **Applications:**
* Evaluation of physical-layer performance for 10G/25G/50G/100G/200G/400G/800G/1.6T optical transport modules, optical cables, and associated components.
* Manufacturing inspection of optical modules.
* Tx/Rx Signal Mask Margin Test, Rx Signal Eye Pattern Analysis (Jitter, Tr/Tf), Tx Signal Eye Pattern Analysis (Jitter, Tr/Tf, Extinction Ratio).
* Co-Packaged Optics (CPO) and Optical Engine PAM4/NRZ signal evaluation.
* **Transmission Paths Supported:** Ethernet, eCPRI/RoE, CPRI, SDH/SONET, OTN, InfiniBand, Fibre Channel.
* **Optical Transceiver Modules Supported:** SFP, QSFP, CFP, OSFP, QSFP-DD, SFP28, QSFP28, CFP2/4/8, SFP56, QSFP56.
* **Cables Supported:** Active Optical Cables (AOC), Direct Attach Cables (DAC).
* **Devices Supported:** TOSA, ROSA, High-Speed Optical Engine, PHY, Driver ICs, CPO.
### Interfaces
* **Electrical:** 40 GHz bandwidth
* **Optical:**
* SMF: 35 GHz bandwidth
* MMF: 25 GHz bandwidth
* **Data Rates:** From 9.5 Gbit/s to 28.2 Gbit/s standard, with optional extensions for higher and lower rates up to 1.6 Tbps.
* **Built-in PC:** Integrates an internal computer for control and data processing.
### Physical
* **Power:** Designed for standard industrial power input, adhering to Overvoltage Category II as defined by IEC 61010. Requires a grounded 3-pin power cord.
* **Ventilation:** Requires at least 10 cm clearance from walls and objects for proper operation of internal cooling fans.
### Compatibility
* **Standards Compliance:** Supports various standards including Ethernet, eCPRI/RoE, CPRI, SDH/SONET, OTN, InfiniBand, and Fibre Channel. Supports PAM4 and NRZ signal analysis.
* **Backward Compatibility:** Backwards compatibility with Anritsu MP2100B remote commands facilitates instrument upgrades.
Why Choose Aumictech for Anritsu MP2110A?
At Aumictech, we specialize in supplying high-end network testing equipment. Whether you need precise optical module characterization, efficient manufacturing line optimization, or comprehensive compliance testing, our team ensures the Anritsu MP2110A delivers maximum performance for your application.
