The DDC SB-3622712-365 is a six-channel Digital-to-Synchro converter card for PCI bus systems that transforms digital input signals into synchro outputs with independent channel operation. Each channel incorporates a dedicated DDC D/S converter, enabling precise motion control and position feedback in industrial automation and aerospace applications. The card supports programmable output amplitudes, resolution settings from 10 to 16-bit, and software-controlled bandwidth configuration. An on-board reference oscillator option eliminates external signal generation and supports configurable reference voltages of 2, 26, or 115 Vrms across the 360 Hz to 10 kHz frequency range with 1.5VA drive capability. All six channels can operate independently with dynamic rotation simulation in both single-speed and two-speed modes. Transformer isolation is available as an optional feature for output channels. The card integrates with Windows and Linux environments via provided SDK and drivers, supports dataSIMS software control, and includes built-in self-test capabilities for detecting Loss-of-Signal, Loss-of-Tracking, and Loss-of-Reference fault conditions.
## Technical Specifications
• **Interface:** PCI Bus (full-size format, double-width when 90 Vrms/115 Vrms outputs utilized)
• **Channels:** 6 independent Digital-to-Synchro conversion channels
• **Input Power:** 5 Vdc @ < 0.665A (maximum)
• **Output Amplitudes:** Programmable
• **Reference Voltage Options:** 2, 26, or 115 Vrms (with on-board oscillator)
• **Reference Frequency Range:** 360 Hz to 10 kHz
• **Reference Oscillator Drive:** 1.5VA
• **Resolution:** Software programmable (10, 12, 14, or 16-bit)
• **Bandwidth:** Software programmable
• **Signal Connector:** 68-pin mini D-type (P1)
• **Physical Dimensions:** 12.3 × 4.2 × 0.91 inches (312 × 106.7 × 23.1 mm)
• **Weight:** Approximately 1 lb
## Key Features
• Independent channel operation with dedicated converters per channel
• Programmable dynamic rotation for single-speed and two-speed systems
• On-board reference oscillator with selectable voltage and frequency
• Optional transformer isolation for output channels
• Built-in self-test with LOS, LOT, and LOR fault detection
• Software-configurable resolution and bandwidth
• Cross-platform SDK support for Windows and Linux
## Typical Applications
• Aerospace motion control and avionics systems
• Industrial automation requiring synchro-based feedback
• Position encoding and resolver interface systems
• Multi-axis motion control platforms
## Compatibility & Integration
Fully compatible with PCI local bus specifications. Controlled via Windows and Linux drivers and SDK. dataSIMS software support available for advanced configuration and simulation.
