The HP/Agilent 6269A is a variable regulated DC power supply delivering 0–40 V and 0–50 A for demanding laboratory, research, and manufacturing applications. This 2 kW unit combines precise voltage and current control with exceptional line and load regulation, making it suitable for powering sensitive equipment, prototype development, and system validation. Both constant voltage (CV) and constant current (CC) operating modes are supported, with electronic overload protection against short circuits and transient faults.
Technical Specifications
Output Ratings
• Voltage: 0–40 V DC
• Current: 0–50 A DC
• Power: Approximately 2 kW
Regulation Performance
• Line regulation (CV): <0.01% + 200 µV across 187–230 VAC or 207–253 VAC
• Line regulation (CC): <0.02% + 2 mA across 187–230 VAC or 207–253 VAC
• Load regulation (CV): <0.01% + 200 µV for full load change
• Load regulation (CC): <0.02% + 2 mA for full load change
• Output noise (CV): <1 mV rms; 5 mV peak-to-peak
• Output noise (CC): <25 mA rms
Dynamic Performance
• Transient recovery: <150 µs to within 20 mV nominal following 50% load step (CV mode)
• Temperature coefficient (voltage): <0.01% + 200 µV/°C
• Temperature coefficient (current): <0.01% + 4 mA/°C
• Operating temperature: 0°C to 55°C
Input Power
• Voltage: 187–230 VAC or 207–253 VAC, single-phase
• Frequency: 50–60 Hz
• Line current: 21 A (187–230 VAC) or 18 A (207–253 VAC)
– Key Features
• Vernier-equipped voltage and current controls for fine adjustment
• 50 V voltmeter and 0–60 A ammeter on front panel
• Rear-panel analog programming with 200 Ω/V voltage sensitivity and 4 Ω/A current sensitivity
• Remote error sensing terminals to compensate for load-lead voltage drop
• Auto-series, auto-parallel, and auto-tracking operation supported
• All-electronic constant current protection against overload and short circuit
• Forced-air cooling; light gray front panel with dark gray case
• Rear-mounted output terminals
– Physical Characteristics
• Dimensions: 19" W × 7" H × 16.75" D (standard relay rack mounting)
• Weight: 93 lbs net
– Compatibility & Integration
Designed for standard relay rack mounting. Remote control and programming via rear terminal strip enables integration into automated test systems and distributed power applications.
