The HP/Agilent 6623A is a triple-output precision linear DC power supply rated at 80 W total, designed for benchtop and automated test system integration. This 3U package delivers fully isolated outputs with dual-range capability, allowing flexible configuration across low and high voltage/current combinations. The unit sinks full rated current through its active downprogrammer, enabling rapid voltage transitions. Programming accuracy reaches 0.06% + 19 mV on voltage (low range) and 0.16% + 50 mA on current (low range), while readback voltage accuracy achieves 0.016% + 2 mV (low range). Output ripple and noise stay below 500 µV RMS and 3 mV peak-to-peak in constant voltage mode. Two outputs can be configured in series or parallel for increased voltage or current capability. Programmable over-voltage and over-current protection, plus electronic calibration, are accessible via GPIB. The 6623A executes power-on self-test via GPIB command and supports SCPI commands with VXIplug&play drivers for system integration.
## Technical Specifications
• **Total Power Output:** 80 W across three fully isolated outputs
• **Output Configurations:** Low range 0–7 V/5 A (40 W), 0–20 V/2 A (40 W), 0–7 V/10 A (70 W); high range 0–20 V/2 A (40 W), 0–50 V/0.8 A (40 W), 0–20 V/4 A (80 W)
• **Voltage Programming Accuracy:** 0.06% + 19 mV (low range); 50 mV (high range)
• **Voltage Readback Accuracy:** 0.016% + 2 mV (low range); 0.016% + 3.5 mV (high range)
• **Current Programming Accuracy:** 0.16% + 50 mA (low range); 20–100 mA (high range)
• **Ripple and Noise:** 500 µV RMS, 3 mV peak-to-peak (constant voltage, 20 Hz–20 MHz)
• **Load Regulation (Voltage):** 0.5–2 mV
• **Load Cross Regulation (Voltage):** 0.25–1 mV
• **Line Regulation (Voltage):** 0.01%
• **Floating Voltage:** ±240 V DC from chassis ground
• **Form Factor:** 3U rack height
## Key Features
• Dual-range outputs with automatic range selection
• Series/parallel output combination for enhanced flexibility
• Fast-acting active downprogrammer with full-current sinking
• Programmable OV and OC protection
• GPIB interface with SCPI command support
• VXIplug&play driver compatibility
• Electronic calibration via GPIB
• Power-on self-test capability (GPIB-initiated)
## Typical Applications
Complex system integration, ATE (automated test equipment), component characterization, and bench-level R&D requiring precision multi-rail power delivery with remote control and monitoring.
## Compatibility & Integration
GPIB connectivity enables integration into instrument racks and automated test frameworks. VXIplug&play drivers streamline software development and system configuration.
