The ISO-Tech IPS-606D is a single-output, 360W switching DC power supply engineered for electronic testing, development, and laboratory environments. It delivers continuously adjustable output voltage from 0 to 60V and current from 0 to 6A, with dual 3½-digit LED displays (green for voltage, red for current) providing simultaneous real-time monitoring. The unit operates in constant voltage and constant current modes with automatic crossover based on load conditions, maintaining exceptional regulation through line and load stability specifications. Remote output control and sensing capabilities enable precise distributed power management across test benches and development stations.
## Technical Specifications
**Power and Input**
• Output Power: 360W
• Output Voltage: 0–60V continuously adjustable
• Output Current: 0–6A continuously adjustable
• Input Voltage: 115V / 230V ±15%, 50/60Hz (switch selectable)
**Voltage Regulation (CV Mode)**
• Line Regulation: ≤5mV
• Load Regulation: ≤5mV
• Ripple & Noise: ≤5mVrms, ≤100mVp-p (20MHz bandwidth)
• Temperature Coefficient: ≤100ppm/°C
• Recovery Time: ≤500µs (50% load change, minimum 0.5A load)
**Current Regulation (CC Mode)**
• Line Regulation: ≤3mA
• Load Regulation: ≤3mA
• Ripple & Noise: ≤3mArms
**Display and Measurement**
• Dual LED Displays: 3½ digit resolution
• Accuracy: ±(0.5% of reading + 2 digits) voltage and current
**Environmental**
• Operating Temperature: 0°C to +40°C
• Storage Temperature: −10°C to +70°C
• Operating Humidity: <80%
• Altitude: Up to 2000m
## Key Features
• Dual-mode operation with automatic CV/CC crossover
• Over-voltage protection (OVP) for load safety
• Remote ON/OFF output control via external terminals
• Remote sensing for cable-loss compensation
• Compact form factor: 128mm (W) × 145mm (H) × 285mm (D), 3.2kg
## Typical Applications
• Component and subsystem functional testing
• Circuit development and prototype validation
• Burn-in and stress testing procedures
• Bench-top laboratory power requirements
## Compatibility & Integration
Supports external control via remote ON/OFF terminals and remote sensing inputs for distributed or automated test setups. Includes user manual, power cord, and GTL-203A test leads.
