The Jasper Electronics CPCI354-1022-47 is a 350 Watt CompactPCI power supply engineered for industrial and embedded systems requiring continuous, reliable operation. Housed in a 6U × 8HP form factor, it integrates directly into standard CompactPCI backplanes via a 47-pin PICMG connector. The unit delivers regulated outputs across four standard PCI rails—5.0V at 40.0A, 3.3V at 40.0A, +12.0V at 9.0A, and −12.0V at 1.0A—with ripple and noise controlled to 50 mV peak-to-peak or 1% nominal maximum from DC to 20 MHz.
## Technical Specifications
**Input**
• AC Input: 90–264 VAC, 47–63 Hz, 7.0A max, single-phase
• DC Input: 36–72 VDC (48V nominal) at 16.0A max, or 20–28 VDC (24V nominal) at 20.0A max
• Inrush Current: 15A peak at AC 115V; 30A peak at AC 230V; 15A peak at DC 24V or 48V (thermistor soft start)
• EMI/Transient: MOV protection; complies with IFCC Level A, EN 55022 Level A, and IEEE C62.41 3 kV differential and common mode
• AC Power Factor: >0.99 typical at 115V full load
• Fusing: Non-user serviceable internal line fuse—10.0A at 250VAC (AC); 20.0A at 125VDC (48V); 25.0A at 125VDC (24V)
**Output**
• Total Power: 350 Watts across all rails
• Voltage Outputs: 5.0V, 3.3V, +12.0V, −12.0V
• Maximum Currents: 40.0A (5.0V and 3.3V), 9.0A (+12.0V), 1.0A (−12.0V)
• Ripple and Noise: 50 mV peak-to-peak or 1% nominal maximum, DC to 20 MHz
• Temperature Stability: <±0.02%/°C (0–50°C after 20-minute warm-up)
• Dynamic Response: 15 msec minimum at low-line, full-load conditions
## Key Features
• Hot-swappable and N+1 redundant operation with internal OR-ing diodes
• Single-wire current sharing on 3.3V, 5.0V, and +12.0V rails for parallel configurations
• Remote inhibit/enable capability
• No minimum loading requirement for single-unit applications
## Typical Applications
Critical infrastructure, telecommunications equipment, industrial automation, and embedded defense systems requiring uninterrupted power and fault tolerance.
## Compatibility & Integration
Standard 47-pin PICMG connector (Positronic PCIH47M400A1); optional 38-pin and 32-pin configurations available. Offset: 7.40 inches (0.291 inches) per PICMG standard.
