The Newport 845HP-01 Digital Shutter Controller delivers precision timing and control for optical shutters in scientific and industrial research environments. This compact controller synchronizes with Newport’s 846HP bistable shutter to enable repeatable, accurate exposure control across holography, materials processing, spectroscopy, and laser-based experiments. The controller combines front-panel simplicity with advanced programmable functionality, supporting both timed and manual operation modes.
Technical Specifications
Controller (Model 845HP)
• Operating Modes: TIME (10 msec to 990 seconds adjustable duration) and MANUAL (independent of timer setting)
• Timing Accuracy: ±0.05% ±10 microseconds
• Maximum Repetition Rate: 10 Hz
• Shutter Opening Delay: 10-second activation available for vibration settling in holographic applications
• Power Consumption: Less than 14 Watts
• Input Voltage: 120 VAC or 240 VAC, 50/60 Hz (jumper selectable)
• Dimensions: 57.2 × 34.3 × 29 mm (2.25 × 1.35 × 1.14 inches)
• Weight: 3.5 lbs
Shutter (Model 846HP)
• Aperture Diameter: 5.6 mm
• Maximum Optical Power: 5 W CW
• Response Time: Less than 3 msec
• Blade Design: Bistable electronic with single moving part; over 1 million operation service life; requires no holding voltage or current
• Cable: 8 ft (2.44 m), 4-pin DIN connector
Electrical Interface
• Shutter Drive Pulse: 5–30 V amplitude into 13 Ω (positive to open, negative to close)
• Coil Operation: +5 VDC logic supply; supports continuous +5 VDC operation; higher voltages up to 30 VDC available for faster response, subject to 3 Watt maximum power dissipation
– Key Features
• Digital rotary switches for time programming and delay configuration
• RESET command required before each actuation; ensures failsafe closure during timed operation
• Post-mountable with SP Series post, VPH Series post holder, and B-2 base
• Front-panel On/Off and mode selection controls
• Optional remote pushbutton cable for manual start control
– Typical Applications
• Holography and vibration-sensitive exposure work
• Laser materials processing
• Time-resolved spectroscopy
• Automated optical bench experimentation
– Compatibility & Integration
The 845HP-01 integrates directly with the Newport 846HP shutter and compatible optical mounting infrastructure. TTL-compatible control logic supports integration with external timing systems and automated instrumentation.
