The NI IMAQ PCI-1410 is a four-channel monochrome image acquisition module for Windows-based PCs, capturing simultaneous video from multiple camera sources via PCI bus master interface. It digitizes analog video signals at up to 40 MHz with 8 or 10-bit resolution, delivering 60 dB dynamic range and supporting RS-170, CCIR, NTSC, PAL, VGA, progressive scan, line-scan, and non-standard camera formats. The module integrates three independent DMA controllers with scatter-gather capability for continuous streaming to fragmented memory buffers, and includes onboard signal conditioning—offset and gain adjustment, software-selectable anti-chrominance filters (PAL 4.43 MHz notch, NTSC 3.58 MHz notch), and 9 MHz low-pass filtering. A 1024 × 10-bit RAM lookup table enables real-time contrast enhancement and gamma correction. The NI IMAQ PCI-1410 transfers data at up to 132 MB/s through a custom MITE ASIC and provides four general-purpose digital I/O lines plus RTSI bus synchronization for integration with other NI DAQ, IMAQ, and motion devices. Onboard 16 MB SDRAM buffers image data, supporting multi-buffer, single-shot, and continuous acquisition modes. The module connects via BNC external connectors and 68-pin VHDCI I/O connector. NI-IMAQ driver software enables control through LabVIEW, LabWindows/CVI, Measurement Studio, and Vision Builder for Automated Inspection.
Technical Specifications
• Channels: 4 monochrome
• Digitization: 8 or 10 bits
• Sampling frequency: Up to 40 MHz
• Dynamic range: 60 dB (10-bit)
• Onboard memory: 16 MB SDRAM
• ADC: 10-bit
• DMA: Three independent controllers with scatter-gather support
• PCI data transfer rate: Up to 132 MB/s (bus master mode)
• Look-up table: 1024 × 10-bit RAM
• Operating temperature: 0 to 55 °C
• Storage temperature: –20 to 70 °C
• Altitude: Maximum 2,000 m
• Relative humidity: 10 to 90%, non-condensing
• Dimensions: 4.2 × 6.9 inches
• Weight: 0.28 lb
– Key Features
• Supports RS-170, CCIR, NTSC, PAL, VGA, progressive scan, and non-standard cameras
• Software-selectable PAL (4.43 MHz notch) and NTSC (3.58 MHz notch) anti-chrominance filters
• 9 MHz low-pass filter for noise reduction
• Programmable offset and gain for input optimization
• Four general-purpose digital I/O lines for triggering and pulse generation
• RTSI bus for flexible synchronization with NI devices
• Area of Interest (AOI) control for optimized data transfer
– Typical Applications
• Machine vision and automated inspection
• Multi-camera video capture and analysis
• Scientific imaging requiring simultaneous frame acquisition
• Industrial quality assurance systems
– Compatibility & Integration
• Windows-based PCs only
• NI-IMAQ driver software
• LabVIEW, LabWindows/CVI, Measurement Studio, Vision Builder for Automated Inspection
• RTSI bus integration with NI DAQ, IMAQ, and motion control systems
• BNC and 68-pin VHDCI connectors
• Compatible with IMAQ-BNC-1 2 m Analog Camera Cable and IMAQ A8055 cable
