The Pacific Power 3150AFXT-2AG is a 15 kVA AC and 15 kW DC programmable power source designed for AC power simulation, product development, and regulatory compliance testing across aerospace, defense, and related industries. It delivers selectable single-phase, split-phase, or three-phase output configurations with extended voltage and frequency ranges that support overvoltage testing up to 20% above nominal equipment ratings and universal input product validation to 120% of maximum nominal specifications.
Technical Specifications
Power Output & Configuration
• AC: 15 kVA | DC: 15 kW
• Input: 208 VAC 3-phase or 380–480 VAC 3-phase
• Selectable output configurations (single-phase, split-phase, three-phase) via front panel or bus command
• Power density optimized for upgrades without increased footprint
• Energy efficiency: 85%
Voltage & Current
• AC voltage: 0–400 Vac L-N / 0–692 Vac L-L; extended mode supports 333 Vac L-N / 576 Vac L-L
• DC voltage: 0–440 Vdc or 0–425 Vdc
• Voltage resolution: 0.01 V | Accuracy: ±(0.25% + 0.25)
• Current limit modes: RMS and peak current
• Constant power mode: Full output from 160 Vac L-N / 277 Vac L-L on 400 V range
Frequency & Waveforms
• Standard range: DC, 15.00 Hz to 1200.0 Hz
• Extended range: DC, 1.00 Hz to 3000.0 Hz
• Waveform types: sine, square, triangle, THD, arbitrary
• Phase angle range: 0.0°–359.9° (0.1° resolution)
Transient & Programming
• 200 steps / 400 segments with LIST, PULSE, and STEP modes
• DC transient voltage slew rate control
• Programmable impedance (real-time and RMS modes)
Protection & Metering
• Over-current, power, and apparent power protection (fold-back or trip selectable)
• Programmable peak current limit
• True-RMS metering: volts, amps, power, VA, power factor, crest factor
– Key Features
• Extended frequency coverage from 1 Hz to 3 kHz for comprehensive equipment testing
• Phase angle programming for three-phase load simulation
• Multiple remote control interfaces: USB, RS-232, LAN (Ethernet), GPIB
• Analog and digital I/O via DB-25 rear panel connectors
• Bench model in standard 19″ cabinet configuration
– Typical Applications
• Aerospace and defense equipment validation
• Universal AC input product testing (90 V–265 V nominal)
• Overvoltage and transient response characterization
• Three-phase power simulation and load testing
• Regulatory compliance testing (RTCA/DO-160 Section 16)
– Compatibility & Integration
Supports RTCA/DO-160 Section 16 compliance testing. Multiple interface options enable integration with automated test systems and remote monitoring.
