The Pacific Power 360ASX-UPC3/G is a programmable AC power source rated at 6000 VA, engineered for demanding test and simulation applications requiring flexible output configurations and precise voltage control. It converts three-phase input into selectable single-phase, two-phase, or three-phase AC output across an extensive frequency range from 15 Hz to 1,200 Hz, with small-signal bandwidth extending to 5,000 Hz. The unit delivers up to 48 A per phase in short bursts, with a continuous rating of 16 A per phase and overload capability to 20 A per phase. Voltage accuracy reaches 0.05% with Continuous Self-Calibration engaged, while output distortion remains below 0.50% THD across the operating frequency band.
Technical Specifications
• Rated Power: 6000 VA
• Output Configurations: Single-phase, two-phase, or three-phase selectable
• Frequency Range: 15 Hz to 1,200 Hz (operation); 5,000 Hz small-signal bandwidth
• Voltage Accuracy: 0.05% with CSC; line regulation 0.1% max (±10% input change); load regulation 0.25% (15–400 Hz) / 0.50% (400–1,200 Hz)
• Output Current: 48/16 A per phase (peak/continuous); 20 A overload; up to 60 A short-term
• Output Distortion: 0.25% THD (15–200 Hz); 0.50% THD (200–1,200 Hz)
• Metering: True-RMS volts, amps, and power
• Waveform Generation: 22-waveform library with arbitrary waveform generator; 99 stored programs
• Input Requirements: 3Ø 440–480 V AC (47–63 Hz) or 3Ø 208 V AC
• Mounting: 19-inch rack mount; 24-inch depth; front or side intake cooling
– Key Features
• Bus-programmable transient simulation with quartz-crystal stabilized frequency output
• RS-232 interface with SCPI protocol standard (UPC-3 configuration)
• GPIB interface IEEE-488.2 available
• Front-panel and bus command control via integrated microcontroller
• External sense and CSC for load regulation improvement to <0.1%
– Typical Applications
• AC power condition simulation across industrial and component frequency ranges
• Transient response testing and dynamic power quality assessment
• Multi-phase power source conversion and frequency synthesis
– Compatibility & Integration
Controlled via UPC Studio Software Suite and LabVIEW™ libraries. Compliant with IEC 61000-4-11, IEC 61000-4-13, IEC 61000-4-14, IEC 61000-4-28, and IEC 61000-4-29 test standards.
