The SL Power / Condor Power CPCI-154-1203 is a 150W CompactPCI power supply engineered for hot-swappable deployment in industrial automation, telecommunications, and mission-critical systems. This 3U × 8HP module accepts 90–264 VAC input (47–63 Hz) and delivers four regulated outputs via a 47-pin PICMG-compliant connector. Built-in current sharing, internal OR-ing diodes, and TTL control signals enable N+1 redundancy and parallel load sharing in high-availability architectures.
Technical Specifications
• Input: 90–264 VAC continuous, 47–63 Hz; PFC enabled to 0.99 power factor at full load (EN61000-3-2 compliant)
• Inrush Current: <15 A @ 115 VAC; 30 A @ 230 VAC (cold start, thermistor-limited)
• Brownout Protection: Maintains regulation to 85 VAC for maximum 30 seconds
• Holdup Time: ≥16 ms at full load after power removal
• Efficiency: Typically 70%
• Output 1: +5V @ 25A
• Output 2: +3.3V @ 20A
• Output 3: +12V @ 5.5A
• Output 4: −12V @ 500 mA
• Overvoltage Protection: Factory-set trip ≤136% nominal; power recycle required for reset
• Overload/Short-Circuit Protection: All outputs auto-recovery on fault removal
– Key Features
• Hot-swappable 3U × 8HP form factor with 160 mm board depth
• TTL-compatible FAIL# and DEG# signals for system integration
• FAIL LED (amber) and STATUS LED (green) for real-time condition monitoring
• Remote sense capability for load regulation optimization
• Output enable via contact closure with recessed pin design (make-last, break-first)
• Enclosed design; requires 15 CFM external cooling air
– Typical Applications
Redundant power architectures in telecom equipment, industrial control systems, and distributed computing platforms where hot-swap capability and N+1 failover are mandatory.
– Compatibility & Integration
Fully compliant with PICMG CompactPCI specifications and PICMG Power Interface Specification 2.11. Parallel operation supported via current sharing and load-sharing control signals.
