The Teledyne LeCroy RP4060 is a 4 GHz power and voltage rail probe designed for high-fidelity power integrity measurements in low-voltage DC applications. It captures small signal variations on power distribution networks with minimal loading and additive noise, making it essential for debugging and characterization of high-performance computing and embedded system power rails.
Technical Specifications
• Bandwidth: 4 GHz
• Risetime: 110 ps
• Attenuation: 1.2x
• Input Impedance: 50 kΩ at DC, transitioning to 50 Ω at approximately 1 MHz
• Noise (Probe Only): 160 µVrms
• Input Capacitance: 0.1 µF in series with 50 Ω
• Non-Destructive Voltage: ±100 V
• Coupling: DC 50 Ω
• Offset DAC Accuracy: 0.1% ± 3 mV
– Key Features
• Offset Range: ±60 V with 0.1% ± 3 mV accuracy — enables DC signal centering at high sensitivity gains
• Dynamic Range: ±800 mV maximum using high-sensitivity gain settings
• Optimized Input Impedance: Flat frequency response from DC to 4 GHz when source impedance is very low
• Comprehensive Accessory Kit: Includes solder-in leads, MCX and U.FL PCB receptacle mounts, coaxial cables, and soft carrying case
• Optional Browser Tip Assembly: 500 MHz bandwidth with selectable 0 Ω, 450 Ω, and 950 Ω resistive tips for impedance matching to 50 Ω
– Typical Applications
Power distribution network analysis, voltage rail monitoring, power delivery network characterization, and low-voltage signal debugging in high-speed digital and mixed-signal systems.
– Compatibility & Integration
• Oscilloscope Interface: ProBus with Teledyne LeCroy MAUI oscilloscopes version 10.1.x.x or higher (32 or 64-bit)
• Connectors: SMA input, BNC output; MCX and U.FL PCB mounts supported
• Probe Offset Amplifier: 50 kΩ DC input impedance via SMA with 0.9 m extension cable
