The Keysight N2792A is a 200 MHz differential probe designed for high-voltage signal measurements in power electronics and automotive applications. It delivers a 10:1 attenuation ratio with 1 MΩ input resistance and 3.5 pF input capacitance to minimize circuit loading. The probe connects to any 50 Ω BNC oscilloscope input and operates from either an internal 9V battery or USB power.
Technical Specifications
• Bandwidth: 200 MHz (–3 dB)
• Attenuation Ratio: 10:1
• Risetime (10%–90%): 1.75 ns
• Gain Accuracy: ±2%
• Input Resistance: 1 MΩ
• Input Capacitance: 3.5 pF
• Maximum Rated Input Voltage: ±60V each side to ground
• Common-Mode Rejection Ratio: > –80 dB at 60 Hz
• Input-Referenced Noise: 6 mVrms
• BNC Cable Length: 120 cm
• Input Lead Length: 15 cm
• Housing: 111 × 22 × 14 mm
• Weight: 170 g (excluding battery and accessories)
– Key Features
• Low input capacitance reduces probe loading on test circuits
• Dual power options: 9V internal battery or USB bus power
• Compact probe head for access to confined measurement points
• Comprehensive accessory kit with hook clips, alligator clips, pincer clips, and micro IC clips
• Variable-pitch clip spacing accommodates different component geometries
• Extension leads available in 5 cm and 10 cm lengths
• DC blocking capacitors supplied for AC measurements (30 kHz–1 GHz, 100V rated)
– Typical Applications
• Power supply and converter topology testing
• Automotive system signal characterization
• Switch-mode power supply analysis
• High-voltage circuit troubleshooting
– Compatibility & Integration
Operates with any ground-referenced oscilloscope featuring a 50 Ω BNC input. The N7013A and N7014A extreme temperature extension kits provide operation down to –25 °C and up to +85 °C, though bandwidth derate to 70 MHz applies when these kits are employed. Operating altitude rating to 3,000 m.
