The Ametek Xantrex Sorensen XDC 60-100 is a 6 kW digital DC power supply engineered for laboratory testing, industrial automation, and power electronics development. This 3U rack-mount unit delivers 0–60 Vdc at 0–100 A with exceptional output stability and multi-layer protection. Low noise performance (85 mVp-p, 10 Hz–20 MHz) and tight load regulation make it suitable for precision measurement and burn-in applications demanding stable, controlled power delivery.
Technical Specifications
Output Performance
• Output voltage: 0–60 Vdc
• Output current: 0–100 A
• Output power: 6000 W
• Output noise & ripple: 85 mVp-p (10 Hz–20 MHz); 10 mV rms voltage, 500 mA rms current (10 Hz–100 kHz)
• Load regulation: 10 mV voltage, 300 mA current
• Efficiency: 82% minimum (typical 89% at nominal line and ambient)
• Minimum output voltage: <0.3% of rated at zero setting
• Minimum output current: <0.2% of rated at zero setting with rated load resistance
Input Specifications
• AC input: 3-phase 190–242 VAC, 47–63 Hz (standard) or 3-phase 342–500 VAC, 47–63 Hz optional
• Power factor: ≥0.95 (208 Vrms); ≥0.9 (400 Vrms HV option)
– Key Features
• Over/under voltage, current, and power protection
• Over temperature and sense protection
• Remote analog programming: 0–5 V or 0–10 V (default) voltage/current inputs, galvanically isolated
• Remote analog monitoring: 0–5 V or 0–10 V (default) output ranges, galvanically isolated
• RS-232 interface standard
• Optional GPIB (IEEE 488.2 with SCPI) and CANbus for multi-unit current sharing
• 3U rack-mount package: 5.22" H × 19.0" W × 21.0" D (133 × 483 × 533 mm)
• Weight: approximately 75 lb (34 kg)
• Operating temperature: 0–50°C
• CE marked (EN61010-1, EN61000-6-2, EN61000-6-4); CSA approved
– Typical Applications
• Precision DC power for laboratory instrumentation
• Burn-in and stress testing of power electronics
• Industrial automation power control
• Research and development in power conversion
