The Ametek Xantrex Sorensen XTS 7-6 is a 42 W programmable linear DC power supply engineered for benchtop and system integration. This single-output unit delivers 0–7 Vdc at 0–6 A with exceptional stability, low noise, and fast transient response. It operates in both constant voltage and constant current modes with automatic crossover and front-panel mode indication.
Technical Specifications
Output Power & Range
• 42 W total output power
• Voltage: 0–7 Vdc
• Current: 0–6 A
Regulation & Performance
• Line regulation (voltage): < 2.7 mV
• Line regulation (current): < 6.25 mA
• Load regulation (voltage): < 2.7 mV
• Load regulation (current): < 6.25 mA
• Transient response: 100 μs typical at ±50% load change
• Ripple and noise (voltage): < 1.0 mV RMS (20 Hz–20 MHz)
• Ripple and noise (current): < 2 mA RMS (20 Hz–20 MHz)
• Drift (8 hours): Max 0.02% of Vmax (voltage), 0.03% of Imax (current)
• No overshoot at turn-on, turn-off, or power failure
Input
• 115 Vac ±10%, 57–63 Hz, single phase
– Key Features
• CV/CC automatic crossover with mode indication
• Current limiting and overtemperature protection
• High-resolution 10-turn potentiometers for precise voltage control
• Simultaneous digital displays (voltage and current) with analog bar graphs
• Remote sense standard (0.5 V per line)
• Optional internal analog programming with overvoltage protection
• 16-bit GPIB (IEEE 488) and RS-232 control optional
• LabVIEW and LabWindows driver support
• Compact quarter-rack package: 134.7 mm H × 109.2 mm W × 297 mm D; 7.7 lb
– Typical Applications
Laboratory testing, component characterization, and industrial control systems benefit from the unit's stable output and fast transient response. Multi-unit configurations support dual, triple, or quad-output benchtop setups and rack-mounted systems.
– Compatibility & Integration
Optional M5A and M11 interface cards enable isolated control and 10-turn current potentiometer operation. Front and rear output connectors support flexible integration into larger test systems.
