The HP 6554A is a 500 W single-output DC power supply engineered for automated test equipment and laboratory applications requiring stable, programmable voltage and current. This series-pass regulated supply delivers 0–60 V at up to 9 A (at 40°C), with exceptional load regulation of 4 mV and line regulation of 1 mV. Front panel and analog programming (0 to −5 V) interfaces enable flexible control in benchtop and integrated test environments.
Technical Specifications
Output Performance
• Output voltage: 0–60 V
• Output current: 0–9 A at 40°C; 8.1 A at 50°C; 7.7 A at 55°C
• Total power: 500 W
• Voltage ripple (20 Hz–20 MHz): 500 µV RMS, 5 mV peak-to-peak
• Current ripple: 3 mA RMS
• Load regulation: 4 mV; line regulation: 1 mV
• Voltage programming accuracy: 0.06% + 26 mV
• Current programming accuracy: 0.15% + 8 mA (both at 25°C ±5°C)
Transient Performance
• Output voltage recovery: <100 µs (within 0.1% rating or 20 mV, whichever is greater)
• Rise/fall time (10/90%, 90/10%): <15 ms
• Settling time (within 1 LSB): <60 ms
Input Requirements
• AC input: 47–63 Hz, selectable 100 V, 120 V, 220 V, or 240 V
• Input power: 1,380 VA / 1,100 W at full load; 120 W at no load
– Key Features
• Fast crowbar and over-voltage/over-current protection (programmable thresholds)
• Over-temperature protection and CV/CC mode crossover
• Remote sensing up to half rated voltage per load lead
• Parallel operation: up to three units auto-parallel capable
• Series/parallel output configuration supported
• Discrete fault indicator and remote inhibit (DFI/RI)
• User-definable power-on state
• Fan speed control for reduced acoustic noise
• Analog programming with 10 kΩ nominal input impedance
– Typical Applications
Automated test equipment; component characterization; power source simulation for integrated circuits, power modules, and battery-powered systems; laboratory benchtop testing with high current demands.
– Control Interfaces
Front panel control and analog programming.
