The Keithley 617 Programmable Electrometer is a precision measurement instrument for voltage, current, charge, and resistance characterization across extremely wide ranges. It delivers high input impedance and exceptionally low input offset current, making it ideal for low-level signal acquisition from high-resistance sources. IEEE-488 programmability enables full automation and integration into automated test systems.
## Technical Specifications
**Measurement Ranges:**
• Voltage: 10 µV to 200 V
• Current: 0.1 fA to 20 mA
• Resistance: 0.1 Ω to 200 GΩ standard; up to 10¹⁶ Ω with built-in voltage source
• Charge: 10 fC to 20 nC
**Display & Data Handling:**
• 4.5-digit LED display with 4.5-digit mantissa and two-digit alpha/numeric exponent
• 100-point internal data buffer
• Autoranging across all functions and ranges
**Built-in Voltage Source:**
• Output range: -102 V to +102 V in 50 mV steps
• Accuracy (1 year): ±(0.2% + 50 mV)
• Maximum output current: +2 mA with active current limit <4 mA
• Settling time: <3 ms to rated accuracy
• Noise: <(1 ppm of output voltage + 200) p-p, 0.1 Hz to 10 Hz
• Input LO to chassis isolation: typically 10¹⁰ Ω || 500 pF
## Key Features
• Driven cable guard with selectable guarding for speed optimization
• Front panel digital calibration with IEEE-488 programmability
• Zero offset correction via front panel control
• One-button baseline suppression from front panel or bus
• Single-shot front panel triggering
## Physical & Environmental
Dimensions: 127 mm (H) × 216 mm (W) × 359 mm (D); Weight: 3.6 kg
Power: 105–125 V or 210–250 V (switch-selectable), 50–60 Hz, 25 VA
Operating temperature: 0°C to 50°C; Storage: -25°C to +65°C; Warm-up: 2 hours to rated accuracy
Relative humidity: 70% non-condensing to 35°C
## Compatibility & Integration
Standard IEEE-488 interface enables full bus programmable operation. Supplied with Model 6011 Input Leads and Model 6172 Triax Adapter.
