The NI PXI-6711 is a 4-channel, 12-bit analog output module for PXI systems delivering simultaneous multichannel waveform generation and deterministic control. Each channel supports up to 1 MS/s update rates with ±10 V or ±EXT REF output ranges, making it suitable for stimulus-response testing, power supply control, sensor simulation, and complex waveform synthesis. The module features double-buffered, multiplying DACs with ±0.3 LSB typical INL and includes 8 digital I/O lines (5 V TTL/CMOS), 2 counter/timers (24-bit, 20 MHz maximum), and comprehensive trigger/synchronization support via PXI Trigger Bus and external clocking.
Technical Specifications
Analog Output
• 4 channels, 12-bit resolution
• Update rate: 1 MS/s per channel
• Output ranges: ±10 V, ±EXT REF (±11 V input, ±25 V overvoltage protection)
• INL: ±0.3 LSB typical, ±0.5 LSB maximum (post-calibration)
• DNL: ±0.3 LSB typical (post-calibration)
• Offset temperature coefficient: ±50 µV/°C
Digital & Timing I/O
• 8 digital I/O lines (5 V TTL/CMOS, independently configurable)
• 2 counter/timers, 24-bit resolution, 20 MHz maximum frequency
• Timing resolution: 50 ns
Synchronization
• PXI Trigger Bus (trigger lines 0–5)
• External clocking and digital triggering supported
– Key Features
• Double-buffered DACs enable glitch-free multichannel updates
• Multiplying DAC architecture supports external reference operation
• Internal and external calibration methods
• 68-pin SCSI-II connector interface
• 16 × 10 cm form factor (standard PXI height)
– Typical Applications
• Power supply control and regulation
• High-speed, deterministic control systems
• Sensor and signal simulation
• Stimulus-response test automation
• Waveform generation for instrumentation replacement
– Compatibility & Integration
Operates in CompactPCI chassis (PICMG 2.0 R2.1/R3.0) with full PXI capability in PXI chassis. Supported by NI-DAQmx driver; compatible with LabVIEW, Python, ANSI C, C#.NET, and MATLAB.
