The NI PXI-8211 is an Ethernet interface module for PXI and CompactPCI systems, delivering Fast Ethernet connectivity where built-in ports are unavailable. Built around an Intel 82559-compatible controller, the module supports both 10BaseT and 100BaseTX standards with full-duplex operation at 10 and 100 Mbits per second. Integration into PXI chassis requires a bus master slot for DMA and controller operation. The compact form factor (6.3 × 3.9 inches) fits standard PXI slots while consuming minimal power at 1.7 W from the +3.3 VDC bus.
Technical Specifications
• Ethernet Controller: Intel 82559-compatible Fast Ethernet Controller
• Network Standards: 10BaseT and 100BaseTX
• Data Transfer Rates: Full duplex at 10 Mbits per second and 100 Mbits per second
• Connector Type: RJ-45
• Status Indicators: Speed LEDs (Green), Activity/Link LEDs (Yellow)
• Power Consumption: 1.7 W at +3.3 VDC
• Interrupt Signal: PCI INTB
• Physical Dimensions: 6.3 × 3.9 inches (16.0 × 9.9 cm)
• Operating Temperature: 0 to 55 °C
• Storage Temperature: –20 to 70 °C
• Operating Humidity: 10% to 90% RH, non-condensing
• Storage Humidity: 5% to 90% RH, non-condensing
– Key Features
• Dual-speed Ethernet support eliminates bottlenecks in legacy and modern networks
• Minimal power draw enables integration in thermally constrained chassis
• Standard RJ-45 connectivity with Category 3+ or Category 5 cabling
• Visual status indication via dual LED types for speed and link status
– Compatibility & Integration
• Compatible with PXI controllers lacking integrated Ethernet, including PXI-8170
• Supported operating systems: Windows NT 4.0, Windows 2000/XP, Windows Me/98
• Driver delivery via PCI/PXI Ethernet Adapters CD with OS-specific installation guides
• Drivers also available from PXI-8170 hard drive (c:imagesethernet) or National Instruments website
• Requires bus master slot in PXI or CompactPCI chassis
• Plug-and-play driver detection on Windows 2000/XP and Windows Me/98; manual installation required for Windows NT 4.0
