The Power Ten P62C-300 is a 3 kW programmable DC power supply engineered for high-demand industrial and laboratory environments. Operating at 300 VDC and 10 A maximum output, this unit delivers stable, regulated power with exceptional precision control. Line and load regulation of 0.1% voltage and 0.5% current, combined with transient response recovery within ±2% in 10 msec, ensures consistent performance across semiconductor burn-in, battery charging, medical systems, and automated test equipment. Remote sensing terminals compensate for line drop at the load. Optional IEEE 488.2 and RS-232 interfaces enable full computer control via SCPI protocol, with configurable control isolation for high-noise environments. The supply accepts three-phase 200-240 VAC input at 50/60 Hz and maintains ±0.05% stability per 8 hours after warm-up.
Technical Specifications
• Output Voltage: 300 VDC maximum
• Output Current: 10 A maximum
• Output Power: 3000 W (3 kW)
• Input: 200-240 VAC, three-phase, 50/60 Hz
• Regulation (Line/Load): 0.1% voltage, 0.5% current of rated output
• Transient Response: 30% current step recovers to ±2% of set voltage within 10 msec
• Stability: ±0.05% of set point per 8 hours (after 30 minutes warm-up at fixed line, load, temperature)
• Temperature Coefficient: 0.02%/°C of maximum output voltage rating
• Ripple & Noise: Low peak-to-peak ripple and noise
– Key Features
• Remote voltage and current monitoring via rear-panel terminals
• Over-voltage protection limit adjustment
• Summary fault status reporting
• Remote sensing for load-point voltage compensation
• Optional IEEE 488.2 and RS-232 remote programming with SCPI support
• Isolated control option for EMI-prone or high ground-loop environments
• Bus bar output interface optimized for high-current delivery
– Typical Applications
• Semiconductor burn-in and production test
• Battery charging systems
• Medical device power
• Ion implant systems
• Radar and high-power laser systems
• Automated test equipment (ATE)
• Research laboratory instrumentation
– Compatibility & Integration
The supply supports contact-closure On/Off control via 6-120 VDC, TTL, or CMOS switching. Bus bar configuration accommodates high-current connections. Optional interfaces enable integration into computer-controlled test environments with full remote programming and status monitoring.
