The Power Ten P63C-50200 is a 10 kW programmable DC power supply engineered for high-current, high-reliability applications including semiconductor burn-in, process control, medical systems, production test, electromagnets, ATE, battery chargers, ion implants, radar systems, and research laboratories. Built on proven PWM and zero-crossing switching topology, this supply delivers low noise performance and exceptional stability across demanding industrial and laboratory environments.
Technical Specifications
• Output voltage: 0–50 VDC
• Output current: 0–200 A
• Maximum output power: 10 kW
• Peak-to-peak ripple and noise: 75 mV
• Line regulation: ±0.1% of maximum rated output
• Load regulation: ±0.5% of maximum rated output
• Stability: ±0.05% of set point per 8 hours (after 30 min warm-up at fixed line, load, and temperature)
• Transient response: 30% current step recovers to ±2% of set voltage within 10 msec
• Temperature coefficient — voltage: 0.02%/°C of max. output voltage rating
• Temperature coefficient — current: 0.03%/°C of max. output current rating
• Overvoltage protection set point accuracy: ±(0.5% + 0.5% of maximum output voltage)
• Overvoltage protection accuracy: ±(0.1% + 0.15% of full-scale output voltage)
– Key Features
• Remote voltage sensing with up to 3% line drop compensation per line or 2 V maximum
• Contact closure on/off control: 6–120 VDC, TTL/CMOS compatible
• Output voltage and current monitoring
• Overvoltage protection limit setting
• Optional IEEE 488.2 and RS-232 interfaces with SCPI Protocol support
• Optional slave interface for multichannel control from single bus address
• Optional isolated analog control (AB option) with 500 V input-to-output isolation and >100 dB common-mode rejection ratio
• Three-phase input power available
• Conservative thermal and mechanical design for long-term reliability through component derating
– Typical Applications
Semiconductor burn-in systems, process control, medical device testing, production test environments, electromagnet excitation, automated test equipment (ATE), battery charging systems, ion implantation, radar system power, high-power laser excitation.
– Compatibility & Integration
The P63C-50200 integrates into multi-supply systems via optional slave interface. Remote programming and monitoring are available through optional IEEE 488.2 (GPIB) or RS-232 serial interfaces using SCPI command protocol. Isolated analog control option eliminates ground-loop issues in high-noise or multi-ground-reference systems.
