The Rohde & Schwarz HMO2024 is a mixed-signal oscilloscope delivering 4 analog channels plus 8 optional logic channels for comprehensive signal characterization. Operating at 200 MHz bandwidth with 2 GSa/s real-time sampling and 2 Msample memory depth, it supports up to 50,000:1 zoom for detailed waveform inspection. The instrument integrates time-domain, logic, protocol, and frequency analysis—including 64 kPts FFT—alongside an embedded component tester and 6-digit counter. Vertical sensitivity spans 1 mV/div to 10 V/div with selectable AC, DC, and GND coupling. A rise time of ≤1.75 ns ensures accurate capture of fast transients. Six simultaneous automeasurements with statistics, a formula editor, ratiocursor, and pass/fail masking round out the analysis toolkit. MSO functionality is standard, requiring no software license.
Technical Specifications
• Bandwidth: 200 MHz
• Analog Channels: 4
• Logic Channels: 8 (with optional R&S®HO3508 logic probe)
• Sampling Rate: 2 GSa/s (real-time)
• Memory Depth: 2 Msample
• Memory Zoom: Up to 50,000:1
• Vertical Sensitivity: 1 mV/div to 10 V/div
• Rise Time: ≤1.75 ns
• Input Coupling: AC, DC, GND
• Input Impedance: 1 MΩ/14 pF
• Analog Channel Input Voltage: 200 V peak, 150 VRMS at 1 MΩ, 5 VRMS at 50 Ω
• External Trigger Input: 100 V peak
• Transient Overvoltages: 200 V peak
• Display: 6.5″ VGA TFT, 640×480 resolution
• Dimensions: 285 mm × 175 mm × 140 mm
• Weight: 2.5 kg (gross)
• Operating Temperature: +5 °C to +40 °C
• Supply: 100 V to 240 V AC (±10%), 50/60 Hz
– Key Features
• Six trigger modes: Slope, Video, Pulsewidth, Logic, Delayed, Event
• FFT analysis with 64 kPts resolution
• Integrated component tester and 6-digit counter
• Automeasurement of up to 6 parameters with statistics
• Formula editor and ratiocursor for custom analysis
• Pass/fail function with mask-based limits
– Typical Applications
• Digital and mixed-signal circuit debugging
• Protocol analysis via I2C, SPI, UART/RS-232, CAN/LIN options
• Component characterization and validation
• Frequency-domain signal inspection
– Compatibility & Integration
• Three USB ports (2× USB A socket) for mass storage, printer, and remote control
• DVI-D video output
• Optional IEEE 488 (GPIB) interface via R&S®HO740
• Supplied with 4× HZO10 10:1 probes, mains cable, user manual, and software CD
