The Xantrex XFR60-10 is a 1200 W programmable DC power supply engineered for research, product development, production testing, and OEM applications. Built on zero-voltage soft switching technology, it delivers clean, stable output with minimal noise while maintaining high efficiency. The compact 1U rack-mount chassis (1.75 inches high) accommodates demanding benchtop and system integration requirements, and superior thermal management allows direct stacking without forced ventilation between units.
Technical Specifications
Power & Input:
• Output: 1200 W at 0–60 V, 0–20 A
• AC Input: 100–120 VAC, 1-phase, 47–63 Hz
• Input Current: Typically 13.1 A at 100 VAC
• Efficiency: Typically 81% at rated output power
• Switching Frequency: 78 kHz nominal (156 kHz output ripple)
Regulation & Stability:
• Line Regulation: 0.05% Vmax (voltage); 0.02% Imax (current)
• Load Regulation: 0.1% Vmax (voltage); 0.05% Imax (current)
• Output Noise: 4 mV RMS, 30 mV peak-to-peak typical
• Drift (8 hours): 0.05% Vmax (3.8 mV)
• Temperature Coefficient: 0.02% Vmax/°C (1.5 mV/°C)
• Transient Response: <3 ms recovery to 0.5% rated voltage (10–90% load variation)
Control & Interface:
• Front Panel: Ten-turn potentiometers for voltage and current; simultaneous display; push-button standby and preview modes
• Remote Analog Programming: 0–5 kΩ or 0–10 kΩ resistance inputs; 0–5 V or 0–10 V voltage sources (10 V default); ±1% full-scale accuracy
• Remote Analog Monitoring: 0–5 V or 0–10 V outputs (10 V default) for voltage and current readback; ±1% full-scale accuracy
• Remote Sensing: 5 V line loss compensation; maximum 5 V/line drop
• Remote On/Off & Interlock: 2.5–15 V signal or TTL-compatible, selectable logic
Program Slew Rate: 100 ms typical rise time.
Protection: Over Voltage Protection (OVP) included.
– Key Features
• Zero-voltage soft switching minimizes EMI and acoustic noise
• Automatic CV/CC crossover with mode indication
• Dual remote sense lines for load-end voltage compensation
• Analog and digital control via front panel or remote interface
• Single-phase 120 VAC input; compact 19-inch rack mount form factor
– Typical Applications
• Component and subsystem characterization
• Prototype and production device testing
• OEM power system integration
• Laboratory research and development requiring stable, programmable output
– Compatibility & Integration
The XFR60-10 operates on standard 100–120 VAC single-phase power and interfaces with standard 0–10 V analog control and monitoring signals. Remote sense, TTL-compatible interlock, and programmable slew rates support integration into automated test systems and production environments.
